I want to output blu ray dvd output in zone 2. Denon AV 4308

Possible PS4 HDMI Handshake Output Problem - AVS Forum ' Home ...

www.avsforum.com/.../1508885-possible-ps4-hdmi-handshake-output-p...

Dec 31, 2013 - 20 posts - ‎15 authors
Nothing seems to make the PS4 pass a signal through the AVR. .... can output videothrough the Integra, why can't Sony get the HDMI working? PS4 - 3D Playback Not Working :-(
30 posts
Aug 12, 2014
Run HDMI Directly to TV or A/V Receiver?
30 posts
Dec 19, 2013
AV receiver problem with Xbox One
30 posts
Nov 23, 2013
Solution to HDMI @ 1080p receiver/display HDCP ...
30 posts
Dec 14, 2008
More results from www.avsforum.com

My Denon AVR-X4000 won't output video signal from attached HDMI ...

forum.blu-ray.com > Audio > Receivers

The Denon DVD-2500 will not play Blu Ray disks - DVD and CD only. Make sure you're using the proper disks.

The Denon DVD 2500BT however, WILL play Blu Ray disks.

Which do you have?

hello,the most common problem with these devices is,1 of 2 culprits, either you have 'DRY' solder on output terminals (within the device)or the main sound output chip's are blown. hope that helps, cheers.

Please follow the below procedure to set the regional settings of your choice on your Philips DVD player:

Step 1: Turn on your DVD player (without disk)
Step 2: Press "Setup" from the remote
Step 3: Go to the "Preferences"
Step 4: Enter "138931" and the current zone will displayed
Step 5: Use the Up and Down arrows to change area (0 = multi-zone)
Step 6: Press "¨Play" on the remote.

Or you can use Leawo Blu-ray Copy to make the Blu-ray/DVD disc to region-free, so that you can play it with any Blu-ray player or computer. It is one of the best Blu-ray copy software to copy and back up Blu-ray/DVD/ISO files to hard drive or blank Blu-ray/DVD disc. This Blu-ray Copy software could help preserve your Blu-ray/DVD discs and keep them away from damages. It could copy and back up Blu-ray/DVD disc to computer in folder and/or as an ISO file, or back up Blu-ray/DVD disc to blank discs in 1:1 rate.

Source: https://ccm.net/faq/3767-how-remove-regional-lock-on-a-philips-dvd-player

you have to update the firmware for the Denon DVD1800-BD
have a look on the websites i sent for more info
1)http://www.avforums.com/forums/blu-ray-dvd-players/821971-denon-dvd-1800bd-owners-thread-2.html

2)http://firmware.denon-online.eu/index.php

read ur insrucion book and it will tell u what to do,,,,if not go in contact with denon

The best possible solution to your problem is :
Connect your blu ray player directly to the HDMI input of you Plasma and watch HD video....
and connect the 5.1/7.1 sound thru the optical or the coaxial link directly to your AVR 3805.
You will not loose anything on the Blu-Ray.
The sound is best processsed by the AVR3805, while the video, which is the real upgrade (BluRay) in terms of resolution of picture would be processed by your plasma.

Connect and Enjoy

For DENON DVD-3930: In "setup", HDMI sound settings have to be "2-channel". Then SACD 5-channel output is enabled.

ok sounds simple you ran the lines threw the tv instead all lines should be ran threw the sterio

see once you turn tv off this cuts the outputs out so now no sound will happen
your sterio should be equipted to take inputs of tv
you want everything to be inputed threw receiver thats why they call it a receiver the outputs on tv goto inputs on receiver
you need to redo your wireing so that this which i described is correct again