Question about HP Office Equipment & Supplies
1. Turn the printer off, wait 10 minutes, and
then turn the printer on.
2. If the message persists, reseat the fuser. If that does not work, replace the fuser. To check the fuser, turn the printer off and remove the fuser. Measure the resistance between the fuser connectors. If it is not within the proper range, replace the fuser. If there is not continuity between the fuser connectors neutral and hot with the fuser removed, replace the fuser. If the problem is not related to the fuser, replace the engine controller board.
Posted on Oct 30, 2009
Printer connected straight to wallsocket,?check the fuser, remove it check for damages, and put it back, if error persist buy a new fuser.
Posted on Nov 24, 2008
For any fuser error, the first thing that should be done is replacing the fuser. If the error still shows up after wards, it could be the LVPS (Low voltage power supply) or a board.
Posted on Jan 27, 2009
Tips for a great answer:
Aug 16, 2011 | HP LaserJet 2840 All-In-One Printer
Jan 12, 2010 | HP LaserJet 2840 All-In-One Printer
Jan 13, 2009 | HP LaserJet 2840 All-In-One Printer
May 26, 2008 | HP LaserJet 2840 All-In-One Printer
Mar 03, 2008 | HP LaserJet 2840 Printer
Sep 28, 2019 | HP HEWLETT PACKARD Pagewriter 200i EKG
1,054 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: