Sound Problem I am using Intel 945GCL with Sigmatel Audio driver. But I cannot get sound when I connect TV Tuner (frontech).So,I directly connect to the tuner card. I did not have such kind of problem when I use ASUS motherboard before. Please help me.

The Desktop Board D845GVAD2 offers integrated audio that uses a portion of the Intel® 82801DB I/O Controller Hub 4 (ICH4) with a SigmaTel* STAC9750/STAC9766 audio codec to create the basic audio subsystem.
It has The AC'97 (Audio Codec 1997) specification defines a high-quality audio architecture that advances the migration to digital audio, while maintaining support for analog interconnects for backward compatibility.
So uninstall your current driver otherwise your system will continue to undergo hardware failure & reboot continuously.
If your sound is still not good there's nothing to do except to install a sound card in your PCI slot & get better sound.

Hello
The package contains an audio cable, connect the cable audio out from card to audio in of computer and connect the speakers at the same place where it is,
or you can directly get audio from tv card by connecting speakers to audio out connectors.
Hope this helps, if so do rate the solution
good luck

my Motherboard is pi945gcm kobian audio driver download

CLICK HERE
or go to http://www.sendspace.com/file/jxlowm
Download the file.
Driver, Software, Instructions included.

Dear Sir,

For every tv tuner card there is line out socket, use two sided phone plug one side of it connect it to the the audio out off tv tuner and another to the Line in socket of your PC,then go the volume properties increase the line in volume. It deffinately solves your problem.If you have any problem regarding this issue leave a feedback,we will glad to assist you

Phone connector

Have a nice day
good luck

Is the driver you are using specific to Vista? Have you verified on frontech's website that there are no newer drivers available?

Fiend your solution direct from intel. Here is your solution....



http://www.intel.com/motherboard/prob676ijt65/solution

apolpo-8

u must connect speaker on tv tuner card;s jack. and go in control panel click on sound and audio device than select audio and change sound playback default device.thanx enjoy good luck plz vote on my comments

go to below link and choose which OS u use..
than click on ok after that u download sound drivers.

http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=2613&lang=eng

i hope its working
thanks

I have my Frontech TV -Tuner Card and I like to connect the present PC with the Frontech TV -Tuner card for using editting with cable tv. Please send me drivers for using it.