Where can i get an installation

Drivers are here:
http://www.opendrivers.com/driver/236296/microsoft-lifecam-nx-6000-vx-1000-vx-3000-vx-6000-driver-1.21-windows-xp-free-download.html

Visit the Microsoft hardware support page
http://www.microsoft.com/hardware/download/download.aspx?category=ICE&type=LifeCam&sku=68A-00001
Fill in the details and click 'GO'
Click on the link:-
"Microsoft LifeCam Readme and Troubleshooting Information"
All the information you require should be found here, Including the latest software and Customer Support

Hello there!

Here you go!

http://www.opendrivers.com/driver/236296/microsoft-lifecam-nx-6000-vx-1000-vx-3000-vx-6000-driver-1.21-windows-xp-free-download.html

Sincerely
Aleksandar Adzic

try to install this, this is support 64bit

http://www.opendrivers.com/freedownload/236296/microsoft-lifecam-nx-6000-vx-1000-vx-3000-vx-6000-driver-1.21-windows-xp-download.html

This will help. Thanks please keep updated. please do rate the solution positively .Thank you for using Fixya

Regards
manish

reinstal the driver for your webcam if you have the cd if not you can download it from here http://drivers.softpedia.com/get/SCANNER-Digital-CAMERA-WEBCAM/OTHER-SCANNERS/Microsoft-LifeCam-Webcam-Driver-30.shtml,merry chrismas to you too.

Here is a suggestion go to microsoft download (customer support) and thier, identify your cam, seeking to get updated drivers and software, Once you download, saving them to a area you will remember on your computer, just follow the installation instructions ,after you double click, on the downloaded file, Hope this helps, Steve

hi adrian,

thank you for using fixya.

you may have encountered that blue screen of death error because of an IRQ conflict. this cane be caused by a conflicting resource for computer components. much like 1 car battery being used by 2 cars at the same time.

o have this resolved, it is best that you have the camera replaced with another model or you can try to remove other USB devices plugged into your computer until you find out what is causing the error message or the conflict to your new Life Cam.\

hope this helps.

regards.

voodoo

here is your link just choose your cam model then download and install the driver.


http://www.microsoft.com/hardware/download/download.aspx?category=ICE

The Microsoft versions might work, if you computer is not too old:

http://www.opendrivers.com/driver/285422/microsoft-lifecam-vx-3000-webcom-driver-2.04-windows-xp(x32-x64)vista(x32-x64)-free-download.html

or

http://www.opendrivers.com/driver/236296/microsoft-lifecam-nx-6000-vx-1000-vx-3000-vx-6000-driver-1.21-windows-xp-free-download.html

Good luck !!

1.Dowload latest drivers from microsoft website for your webcam model
2.there is no driver install process in xp/vista environments
3.install default webcam drivers.