What is a Lucent Pipeline P130-u-v35-asa used for

If you have already tried using different HDMI cables and testing the system on different TVs with no success, here are some additional troubleshooting steps you can try: Check the input settings on your TV: Make sure you have selected the correct input on your TV. Sometimes, the input setting may have changed accidentally, or the TV may have multiple HDMI inputs, so it is worth double-checking. Check the output settings on your Bose V35: Make sure the output settings on your Bose V35 are correct. Go to the "Video" settings on your Bose V35 and make sure the "HDMI Out" is selected as the output option. Power cycle your equipment: Try turning off your TV, Bose V35, and any other devices connected to the system. Unplug everything from the power source, wait a few minutes, and then plug everything back in and turn it on again. Reset your Bose V35: If none of the above steps work, you can try resetting your Bose V35 to its default settings. To do this, turn off your Bose V35 and unplug it from the power source. Then, press and hold the "Source" and "Setup" buttons on your Bose V35 remote control for about 10 seconds until you see "Resetting System" on the display. If you have tried all of these steps and are still not able to get a picture, it may be a hardware issue and you should consider contacting Bose customer support or a professional repair service for further assistance.

Bernardo, Md5628 v35 tarjeta pci fax moden md5628 v35 garantizadas
Md5628 V35 en MercadoLibre Venezuela
Download Ambient MD5628D for free
http://es.pcdrivers.guru/related/md5628+v35
https://es.answers.yahoo.com/question/index?qid=20070126125440AAsX0Xx

Have you tried this ...
In ASA, enter the command ch sta xxxx.
Select tab 2
In the second column of features , you will see "Auto Answer". This should be set to "none".

Good Luck!

Are you trying to get the auto attendant to answer the lines and if so which type of voicemail do you have?

if you are trying to change for one phone its not possible because the time changes for all the phones and if that is ok with you go to asa and give the command change time in that it will give you the options.

You have to program a button on ext 10
by doing a command #111
Toggle button on and off to clear the message

Try rebooting the system. Because you tried to dial the ASA extension, it gave you that error. See if just rebooting the processor gets rid of it.

log in to belin website "www.belkin.com/uk/support and download the firmware under software and firmware section.
once u download it lof in to your router unterface by connecting the rtr to ur comp.
open the internet explorer and typr 192.168.2.1 and on the router interface u have firmware update clikc and browse te file u download and click update that r bye............

You need to purchase ASA DXD card. Can do it at ivdsonline.com they can help you set it up as well

Hi Smr. I ran into the same problem. I found out that ASA means auto answer. My phone guy said its rarely used anymore becuase autoattendant does so much more. you get the message when you enable (or in my case) access anything that needs the card. I did it by accident by hitting intercom 891.

I found a thread that suggested a system reset that worked ... and (I confirmed ion page 4-55 of my manual) it doesn't erase any settings ...but it does disconnect any calles in progress.

In case you don't have the manual here's the procedure (which I just did minutes ago)

hit "feature", "00" , then "#728"

Sit tight about 10 seconds and all should go back to normal.
email me if you have uestions or need a copy of the manual.
[email protected]