Question about Sharp AR-5316 Advanced Digital Imager Copier

1 Answer

Sharp AR-5316, showing L6 on display

My sharp AR-5316 is displaying an error code L6. please what could be the possible fault and solution.
thanks.
[email protected]

Posted by on

  • 8 more comments 
  • Anonymous May 21, 2008

    error L6

  • Anonymous Feb 11, 2009

    SAME PROBLEM SHOWING L6

  • Anonymous Mar 17, 2014

    L6 code on an AR M 206 Sharp copier

  • Anonymous Mar 24, 2014

    icannot reset regarding this password

  • Anonymous Mar 29, 2014

    H and 4 displaying alternatively

  • Anonymous Mar 30, 2014

    error code l401

  • Anonymous Mar 31, 2014

    How to reset the id code in sharp copier ar 5316

  • Anonymous Mar 31, 2014

    How to reset the lock code in sharp copier ar 5316

  • Anonymous Mar 31, 2014

    How to reset the lock code in sharp copier ar 5316

  • Anonymous Mar 31, 2014

    How to reset the lock code in sharp copier ar 5316

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 33 Answers

The L6 code means trouble with the laser unit ( polygon motor), it has to be replaced. The laser unit is under the exit tray. Hope this helps.

Posted on Jan 02, 2008

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The printer Ar-5516 is showing H4 error


this error means:
heat roller abnormally low temperature.
for check:
1- check the heater lamp
2- check the thermistor
for reset:
clear key --> interrupt key --> "0" key --> interrupt key --> 14 --> start key

Jul 04, 2012 | Sharp AR-5316 Advanced Digital Imager...

1 Answer

My sharp AR-5316 is displaying an error code L6. please what could be the possible fault and solution. mzm from dubai


Error code L6: Polygon motor lock trouble Details : The polygon motor does not rotate. Possible Cause :
  1. Polygon motor unit failure
  2. Polygon motor connection harness trouble
or disconnection
  1. MCU PWB failure
Solution:
  1. Replace the polygon motor.
  2. Replace the MCU PWB.



Oct 14, 2010 | Sharp AR-5316 Advanced Digital Imager...

1 Answer

Sharp AR-M205 - Error Code L6


Hello sir; "L6" display it means laser motor defect need to replace.

Aug 19, 2009 | Sharp AR-M205 Copier

3 Answers

Error code sharp 5127


go to percision roller in phx arizona you can get all sharp service manuels i have alos seen them on ebay?

Jan 28, 2009 | Sharp AR-5316 Advanced Digital Imager...

1 Answer

L6 sub 10


Hello sir; I'm not sure the error code can be reset or not but we can give it a try, the easiest way just turn power on and off if don't work follow following steps;
1, press "#", "interupt" "c" "interupt"
2, enter 14 then press start.

Jan 14, 2009 | Sharp AR-5316 Advanced Digital Imager...

1 Answer

Gunawan


Hi Gunawan,
The error 'L6' is usually an indication of problems with the Laser Unit in the copier.
Unfortunately the unit will have to be replaced and can only be done by trained personnel.
Contact your closest Sharp Dealer for assistance.
Regards
Gavin

Oct 13, 2008 | Sharp AR-5316 Advanced Digital Imager...

13 Answers

Error code 4H on sharp ar 5316


WHEN THE SHARP AR-5316 PHOTOCOPIER IS SWITCHED ON THE ERROR CODE 4H APPEARSAND THE MACHINE CANNOT BE OPERATED. IHAVE TRIED THE SOLUTION SUGGESTED JUNE THIS YEAR BUT IT DID NOT WORK. WHAT CAN I DO TO GET THE MACHINE TO WORK? IT IS VERY URGENT.

Feb 18, 2008 | Sharp AR-5316 Advanced Digital Imager...

1 Answer

Sharp ar-5316


L6 is a fault with the laser.
To be more specific there is a set of mirrors mounted to a motor inside the laser assembly. The machine is detecting the motor is not running.
Most likely the laser itself will have to be repalced, it is also possible the main processor has failed and is not seeing the motor running.
There is the possibility of a loose connector, but that is the least likely.

Jan 02, 2008 | Sharp AR-5316 Advanced Digital Imager...

3 Answers

Sharp AR 5316


there might be some dirt on thermistor above the heater upper roller pls check and clean the fuser unit then use simulation 14 to reset the machine enter simulation by presssing #,interrupt,c,interrupt in sequence display is then off, then no. 14 then start key h2 disappears ok

Sep 04, 2007 | Sharp AR-5316 Advanced Digital Imager...

Not finding what you are looking for?
Sharp AR-5316 Advanced Digital Imager Copier Logo

2,709 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

268 Answers

amir hamza
amir hamza

Level 2 Expert

318 Answers

k24674

Level 3 Expert

8081 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...