Player will not initial stays on initializing

ele nao ta ligando so assim initializing

1. it wont trun on it goes 2 the initializing screen

If you leave it long enough it should initialise. I had to plug it into mains power so the battery doesn't go flat while it's trying to ido so. But then again, your battery might last longer than mine as mine was a factory repair, so there's a laundry list of issues I've had with it.

Try to charge it for at least 8 hours, and also try this website:
http://voxrightnow.custhelp.com/app/answers/detail/a_id/2200

remove all the files and then try

Go to "http://voxrightnow.custhelp.com/cgi-bin/voxrightnow.cfg/php/enduser/std_adp.php?p_faqid=2559"
To update the firmware of the M42xx mp3 player click here and download the firmware. start the firmware and when it is runnin plug the M42xx in at the same time holding down the PLAY BUTTON (center) until a white screen with a small computer with a line going to your M42xx is displayed and then release the PLAY button. You can then click on start and the firmware update will complete,,, DO NOT DISCONNECT DURING THIS UPDATE... it may take 2 times to complete this but it will work.... YEA!!!!


CARL

our firmware went bad.
Just got to the RCA website.
http://www.rcaaudiovideo.com/
search your make and model
download the firmware.
Then hook you mp3 player to usb device of your computer.
After mp3 is hooked to computer
Install the newly downloaded firmware.

my e200 does that im sooo pissed it just stays on the screen turns blue than goes back to home screen. i let the batteries run out and the same thing still happens!!

the answer is to go to settings click on information and go to erase internal memory ....that is the way i fixed mine

Please go to my blog to fix your problem. http://terminaltech.blogspot.com/2007/04/iriver-h10-freezing-at-initializing.html