I have Symbol LS9208 barcode scanner, but I don't have any cables. I need schematics of USB or RS232 cable for this scanner.

RS232 Barcode Scanner Cable
Handheld scanner cable
Connector: DB9, DB15, RJ45
Cable: PU, PVC, 26AWG, 28AWG...
Application: Computer POS system, Scanner 0R Metrologic Honeywell barcode scanner MS9540 MS5145 USB Cable ???4 Similar from this Supplier Straight USB Cable with chip for Honeywell Metrologic MS5145, MS9540, MS9590, ETC....

Its not a driver problem.

-Go to Control Panel.
-Click Accesibility options
-Select General tab
-Check Use SerialKeys
-Click configuration Button
-Select the Com port
-Select 9600 baudios
-Click accept Button

Thats all.



A mi me funciono con esos pasos. Suerte.

atte
oshamo

you're going to either connect it to a com port that provides power, or get a different cable that allows you to connect an external power supply to it.

CBA-R01-S07PAR RS232 Cable assy, 50-14000-009R 220V PS,


or get a usb cable - program the scanner to USB, This will provide the power.

CBA-U01-S07ZAR-B

but only if you have an operating system that recognizes USB

If the scanner is connected through USB connection, the barcode should appear in the Notepad. If you use the Serial connection RS232, the Barcode data are showed than in Hyperterminal or other application, which is interpreting data from Serial Port.
Please scan the barcode from Product Guide according to your connection. And check the scanned data in an application - Notepad for Keyboard Wedge or USB, Hyperterminal for RS232.

The barcode is located in the manual at http://support.symbol.com/support/search.do?cmd=displayKC&docType=kc&externalId=6083307apdf&sliceId=&dialogID=27078141&stateId=0%200%2027076163 at the page 45 , the name is "Set Factory Defaults"

HELLO,

the kit part number you have is a usb power plus kit, what you need is cable part number:
CBA-U01-S07ZAR
If you want to order one, let me know. I can be reached at 7275714159 x251

Thank you,
Kim GAnoe

Hi, you will need the 25-17821-20 and STI80-0200R cables to connect to PS/2. You must have a PS/2 keyboard for this connection.

If you would prefer to connect to a USB port you should get the 25-17821-20 cable with the STI85-0200R.

The RL-475 was for the IBM, but it also supported Synapse which is the STI cable.

You can purchase a USB cable for the scanner. The cable comes out of the handle of the scanner. The part number of the USB cable is CBA-U01-S07ZAR.

I don't know if this applies to the LS22208.

Symbol Support FAQ says;

A slow continuous flashing LED on the LS9208 indicates that the LS9208 has been put into “programming mode” and is ready to scan programming bar codes. Once the LS9208 is correctly programmed, the LED should stop flashing and remain on, indicating that the scanner is ready for use.

A fast, continuously flashing LED on the LS9208 indicates an internal problem. When the LED is in this state, the LS9208 laser is also shut off for regulatory reasons.

We support these for some big retailers. When they call with that issue 99/100 it's reseat the cable from the base of the scanner (or the system if accesible), no re-programming).

hi
easy to remove the code. I can send emails with setting
Roberto