Can not find instructions to connect jabra bt8040 to my cell phone,,,,now that hands free is law as of today!

1) Ensure that your Jabra headset is turned completely off. Press the tap button on the headset until it ceases flashing and the light goes off.

2) Hold down the tap button to power your Jabra headset back on. Keep holding the power button until the lit power indicator cycles past flashing mode and becomes solid.

3) Release the power button.

4) Navigate through your cell phone "Settings" menu and ensure your "Bluetooth" or "Hands-free" section is set to the "On" or "Active" mode.

5) Choose "Search for new devices" or "Find new devices" on your phone's Bluetooth or hands-free menu.

6) Place the Jabra headset close to your phone to ensure it can be discovered by your cell phone.

7) Select a "Connect" or "Pair" option once the Jabra headset name displays on your cell phone.

8) Enter the default passcode by entering "0000" on your cell phone keypad.

9) Ensure that the Jabra headset has been paired. Look for the Bluetooth icon in the upper portion of your cell phone screen. Make a call to verify that audio is being routed through the Jabra headset.

http://img1.jabra.com/sites/Jabra/GNimages/Products/WirelessHeadset/BT8040/Documents/UM/BT8040_UM_EM_EN_1409.pdf

Here you go

Hi
Paring the JABRA head set to Mobile phone
1. Turn headset off. Press and hold until solid light comes on.
2. Activate Bluetooth on your phone.
3. Search for Bluetooth devices and select Jabra BT2070.
4. Press ‘OK’ on the phone ,If the phone asks for a PIN then confirm with PIN code 0000 (4 zeros)


Thank You

Go to this site, and it will walk you through each step to connect your particular Jabra headset with your cellphone. Choose the headset, and then at the next page, choose your phone. Moving your mouse over each step will change the picture to what you should be seeing on your phone at each step.
http://jabra.pairx.co.uk/ Pls come back and let us know if this solved your problem.

password is 0000

You may need to reset your Bluetooth devices. Please follow the steps below:

- Delete BT8040 from cell your phone. (if listed)
- Turn your cell phone off completely, and remove battery for 10 seconds. Please consult your phone provider prior to removing battery.
- Connect the BT8040 headset to the charger for 10 seconds then unplug.
- Place the battery back into your phone and power your phone on.
- Remove the headset from the AC cord.
- Turn off the headset by pressing the answer/end button until the light flashes rapidly then release.
- Press the answer/end button until you receive a solid blue light. This may take up to 10 seconds.
- Go into the Bluetooth menu on your cell phone and follow the cell phone’s instruction guide for pairing a Bluetooth headset. This generally involves going into a “devices” or “hands free” menu and adding a new device. Your phone may ask if you want to pair with the headset, accept by pressing “yes” or “OK” and confirm with the passkey or PIN 0000 (4 zeros).

I have the env Touch and the Jabra Halo. Initially, I had a problem pairing the two, then I realized that I was not following the directions properly. The manual shows two sections for pairing ("first time pairing" and "later pairing"). I was following the instructions for the former when I should have been following the latter. I also failed to notice that the BT indicator was flashing blue and not solid blue, as it needs to be, for pairing mode. So, if you haven't already done so, follow the instructions for "later pairing" here. Make sure that you see the SOLID blue light on the BT indicator on the headset when you try to pair.

No problem. When Jabra is off, press and hold till green light turns blue. On the iPhone: settings, general, bluetooth; switch to on. It will search, then it will list the Jabra BT8040, not paired. Highlight the "not paired" line, and it will start to pair; a few seconds later, it will say "connected".

http://www.msgdigital.com/productdetail.asp?productid=46551

I had the same problem-- i asked a verizon wireless guy and he said it's almost always four or six zero's so "0000" or "000000". Hope it works for you!

Make sure the headset is off. iPhone--Settings--Bluetooth---On---Press and hold the answer/end button for approx 5 secs until lite turns sold blue. It works