Where can I get a setup utility CD-Rom from for my CanoScanFB336u?

Is it a think pad ?
Power off your Thinkpad.
Press and hold the "F1" key and turn your Thinkpad on, still holding the "F1" key down.


Release the "F1" key when you hear repeating beeps. Wait for the "IBM BIOS Setup Utility" to load.

Select "Startup" using the arrow keys and press "Enter."
Select "Boot" or "Startup Sequence" and press "Enter."

Select "CD-ROM Drive."
Press the "F6" key repeatedly until "CD-ROM Drive" sits at the top of the list.

Insert your recovery CD into your Thinkpad's CD-ROM drive.
If you have multiple recovery CDs, insert the CD that has "Disc 1" on its label.

Press "F10" to save your changes and exit the BIOS Utility.
Select "Yes" and press "Enter" when the "Setup Confirmation" window appears.

Your laptop will restart. Wait for the Recovery Utility to load.

Select "Restore to Factory Specifications" to erase the contents of your hard drive and reinstall the Windows version and drivers that your Thinkpad originally came with.


Follow the Recovery Utility's onscreen instructions.
When prompted to insert another disc, do so according to the numerical labels on your recovery CDs (e.g., insert "Disc 2" after "Disc 1" and "Disc 3" after "Disc 2").

Your Thinkpad restarts when the restore process finishes. Power off your Thinkpad.

Hold down the "F1" key and power on your laptop to access the "IBM BIOS Setup Utility."


Select "Boot" or "Startup Sequence" and press "Enter."
Press "F9."

Select "Setup Defaults" from the menu and press "Enter" so that your Thinkpad no longer boots from the CD-ROM drive.

Press "F10" and select "Yes" to confirm your changes.
Your Thinkpad will restart and load your newly installed operating system.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-61432
ThinkVantage Technologies downloads

hi, hope this helps,

1. Make sure the computer is turned off.

2. If any peripheral devices, except the optional external CD-ROM drive unit

(CE-CD05), are connected to your computer, disconnect them.

3. Turn on the computer.

4. When the message Press <F2> to enter SETUP appears, press F2. The

Setup Utility opens.

5. Insert the Product Recovery CD-ROM disk 1 into the CD-ROM drive.

6. In the Exit menu, select Load Setup Defaults; then, press Enter twice.

7. In Boot Sequence of the Main menu, set CD-ROM Drive to the top of the list;

then, press ESC.

8. In the Exit menu, confirm Exit Saving Changes is highlighted and press

Enter twice.

9. Read the message on the screen, and select the operating system which you

had selected for the first time you use the computer; then, press Enter.

You cannot change the operating system from the first choice.

10. Read the message on the screen, and select the way to recover your system;

then, press Enter.

11. Read the message and select Continue; then, press Enter.

12. Read the message and select Continue again; then, press Enter.

13. If you see the message asking you to insert the Product Recovery CD-ROM

disk 2, remove the disk 1 and insert the disk 2; then, press Enter.

14. If you see the message asking you to insert the Product Recovery CD-ROM

disk 3, remove the disk 2 and insert the disk 3; then, press Enter.

15. If you see the message The Operating System has been recovered

successfully, remove the Product Recovery CD-ROM disk 3. The system will

restart automatically.

16. When the message Press <F2> to enter SETUP appears, press F2. The

Setup Utility opens.

17. In the Exit menu, select Load Setup Defaults; then, press Enter twice.

18. In the Exit menu, confirm Exit Saving Changes is highlighted and press

Enter twice. The system restarts.

19. Set up Windows, following the instructions on the screen. When you finish
the setup, the recovery is completed.

please the scaner driver cds put in cd-rom other cd dariter and instoll the scaner driver ane location in c drive in instoll
and start the scaner and opening the user progrmmes and start job
and second time adobe photofhop progrmmes is instoll and open the photoshop and scan in and you chouse the file just tiff - jpeg -other select and ok this file other progrmme in workink file ok

Go to there web site and download the drivers.
http://www.driversupdated.com/exact/canon.php?kw=CanoScan+
This will take you there should fix your problem let me know.
good luck

How to Install Windows 98 loadTOCNode(2, 'moreinformation'); 

1. Insert the Windows 98 Startup disk in the floppy disk drive, and then restart your computer.
2. When the Windows 98 Startup menu is displayed, choose the Start computer with CD-ROM support option, and then press ENTER.
3. If CD-ROM support is provided by the generic drivers on the Startup disk, you receive one of the following messages, where X is the drive letter that is assigned to your CD-ROM drive: Drive X: = Driver MSCD001
   
   Drive X: = Driver OEMCD001 NOTE: If your CD-ROM drive is not available after you boot from the Windows 98 Startup disk, install the CD-ROM drivers that are included with your CD-ROM drive. For information about how to obtain and install the most current driver for your CD-ROM drive, view the documentation that is included with your device, or contact your hardware manufacturer.
   
   
4. Insert the Windows 98 CD-ROM in the CD-ROM drive, type the following command at a command prompt, and then press ENTER X:\setup where X is the drive letter that is assigned to your CD-ROM drive.
   
   
5. When you receive the following message, press ENTER, and then follow the instructions on the screen to complete the Setup procedure: Please wait while the Setup initializes. Setup is now going to perform a routine check on your system. To continue press Enter.

press f10 during startup , when the bios open, look for the setting "halt on" . it will have a choice of keyboard, all errors or no errors , set it on "no errors" save and reboot. that may fix it.
You could also get another keyboard (neighbors or a new one) and test to see if a new keyboard solves the issue without recovering your system.
you can also use the recovery CD that came with your system:
USING THE RECOVERY CONSOLE TO REPAIR DAMAGED
FILES
If you cannot start your computer, you can run the Recovery Console from operating system CDROM
provided with the PC. To run the Recovery Console from the operating system CD-ROM:
NOTE: Make sure that the system is configured to boot first from the CD-ROM drive, then from
the hard drive. You can verify or change device boot order using the Computer Setup (F10) Utility.
For more information, refer to the Computer Setup (F10) Utility Guide provided with the
computer.
1. Insert the Windows 2000 or Windows XP CD-ROM into the CD-ROM drive.
2. Click Start > Shut Down, then select Restart from the drop-down list.
3. In the Shut Down Windows dialog, click OK.
4. Press any key to start the computer from the CD-ROM drive when you are prompted to do so.
5. On the Welcome to Setup page, press R.
6. Choose the installation that you want to access from the Recovery Console.
7. Type the administrator password. If the administrator password is blank, press the Enter key.

How can i install my canonscan 20 without the cd rom

In case you have a d646u you will found your driver here:

http://support-au.canon.com.au/EN/search?canonsearch=1&lang=EN&category=Scanners&series=Scanners+(Small+Office+-+Home+Office)&model=CanoScan+D646U+ex&menu=Download

LIDE 25 driver:
http://support-au.canon.com.au/EN/search?canonsearch=1&lang=EN&category=Scanners&series=Scanners+(Small+Office+-+Home+Office)&model=CanoScan+LiDE+25&menu=Download

You can download it from here:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=351&modelid=11463

Just wait for the entire page to load, and just select your OS and download.

Hope that helps! Should you have any further questions, please feel free to post them here.

P.S. - If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.

Thank you for using FIXYA!

Cheers!
IrishDruid

LiDE 25 software and drivers located here -

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=351&modelid=11463