Question about HP LaserJet P4014n Printer

3 Answers

Error 68.2 permanent storage write fail (Hp laserjet P4014n)

68.2 permanent storage write fail.
(for help press ?, to continue press ok)

if i press ok it will print what ever job was sent but you have to kepp on pressing ok for each job send, but its not proper because its a network printe thus i need a solution that will clear this error massage for good.
thank you for yuor solution. this is for my hp laserjet P4014n printer

Posted by Anonymous on

  • 3 more comments 
  • Anonymous Oct 27, 2009



    I didn't understand what you said when you said,"Just hit the check mark button again and it should take care of the problem." What is this?

  • Anonymous Nov 02, 2009

    thank you but the problem still persists

  • Anonymous Nov 02, 2009

    thank you but the problem still persists

  • Anonymous Nov 02, 2009

    thank you but the problem still persists

  • Anonymous Dec 28, 2015

    really thank you for Fixing this Problem its work and the Error disappear
    my Printer is HP CP3505X and it work very well

×

Ad

3 Answers

Dennis Kierulf Ordinante

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 404 Answers

Hi kgrema! I will be glad to assist you in this issue,
Usually all you have to do is initialize hard disk even if you do not have one. Just turn off the printer. Turn the printer back on and when the memory starts to count hold down the menu key until all three lights come on. When all three lights are on solid release the menu button and press the arrow back button and initialize disk should appear in the menu. Just hit the check mark button again and it should take care of the problem.

Here is the link just incase it does not solve the issue.

HP Support document
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=bpl12422&jumpid=reg_R1002_USEN#A46

I hope this will solve your issue

Posted on Oct 26, 2009

Ad

Ihsan Ullah

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Not resolve the issue.....
still pending
when Initialize disk appear
bellow arrow button is not working.

Posted on Aug 09, 2015

Ad

NinaE

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,278 Answers

Hello !

From HP Support:
68.X PERMANENT STORAGE WRITE FAIL To continue press (Select) Description A nonvolatile storage device is failing to write. Pressing the Select (check) button should clear the message. Printing can continue, but behave unexpected in response to the changed settings. Another suggestion:
Turn off the printer. Turn the printer back on and when the memory starts to count, hold down the Menu key until all three lights come on. When all three lights are on solid, release the Menu button and press the arrow back button (<) and the initialize disk should appear in the menu. Just hit the Select check mark button again and it should take care of the problem.

Hope these suggestions help.

Posted on Oct 27, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

If I'm receiving Error 58.04 on th HP laserjet P4014n How do I shut it off?


this code comes from defective power supply or dc controller

Jul 13, 2014 | HP LaserJet P4014n Printer

1 Answer

Hi i have Xerox 7760DN with both ps anc pcl enabled - there's a 68 page document getting prited everytime the printer is turned with bunch of gibbersih from startup. DO you know the resolution for


Sounds like a print job was sent to that printer using the wrong print driver. Unplug the printer from the network and see if it only prints the startup page. If so, then you need everyone to cancel the print jobs they sent to this printer. Then hook the network cable back to the printer and see if a print job can be sent to it (one that has worked in the past). I suspect someone has an old printer driver that is using this machines IP address to print to and it is confusing the Image Processor Board...

Apr 04, 2013 | Xerox Phaser 7760DN Laser Printer

1 Answer

Hp lj2420 errcode 68.2


The printer permanent storage is
full. Some settings might have
been reset to the factory defaults.

1. Press the SELECT ( ) button
to continue.
2. For 68 errors, turn the
printer off, and then turn the
printer on again.
3. If a 68 error persists,
initialize NVRAM. See the
caution and note in To
initialize NVRAM.
4. If this error message persists,
replace the formatter (see
Formatter).

Apr 04, 2011 | HP LaserJet 2420 Printer

1 Answer

HP Laser Jet 5500 DN Error 68.8 permanent storage error Clears after restart of the printer.


68.8 is a new one. It's not in the manual. The only two 68 errors I could find are 68.0 and 68.1.
In any case the 68 error says that one or more of the printer settings got hosed and reverted to its factory default.
Go through the printer settings and see if you can find what changed.

The easiest way to check is to print out a menu map.
1. press the check mark on the control panel
2. press the down arrow to highlight MENUS
3. press check mark to select MENUS
4. press down arrow to highlight PRINT MENU MAP
5. press check mark to select PRINT MENU MAP

Mar 10, 2011 | Office Equipment & Supplies

1 Answer

Error 68.2 permanent storage write How do you fix the error?


all you have to do is initialize hard disk even if you do not have one. Just turn off the printer. Turn the printer back on and when the memory starts to count hold down the menu key until all three lights come on. When all three lights are on solid release the menu button and press the arrow back button and initialize disk should appear in the menu. Just hit the check mark button again and it should take care of the problem

Feb 16, 2011 | HP LaserJet P4014n Printer

1 Answer

I have one printer lj 2420 68.0 permanant storage full error


Error 68 is simm memory problem.

68 Error / Service / Cold Reset

All printers

  1. Temporary error. Cycle power to printer
  2. Bad formatter PCB

LJ4, 4+, 4P

  1. NVRAM not initialized.

68 Memory

IIISi, 4Si, 4V

  1. Bad SIMM memory. Check and replace SIMM's

Feb 05, 2011 | HP LaserJet 2420n Printer

1 Answer

Printer hp laserjet 2420 error 41.2 dan error 68.2


Hi,

The 41.2 printer error means beam detect misprint error. To resolve this try the ff:

  1. Press c00099410.jpg (Select). The page containing the error automatically reprints if jam recovery is enabled.
  2. Turn the printer power off, and then turn on the printer power.
  3. If the message persists, click here to access the HP support Web site at http://www.hp.com/support/lj2300 ,
The error 68 regardless what number follows after it is about Storage Error. One or more printer settings saved to storage device x are invalid and have been reset to factor defaults. To resolve this:

Press c00099410.jpg (Select) to clear the error and continue printing. Printing can continue, but unexpected behavior might be experienced because an error occurred in permanent storage.

Hope this helps.

Thank you for using FixYa.

Nov 26, 2010 | HP LaserJet 2420 Printer

Not finding what you are looking for?
HP LaserJet P4014n Printer Logo

Related Topics:

10,225 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

efs_perpends
efs_perpends

Level 3 Expert

1997 Answers

Cindy Wells

Level 3 Expert

6164 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...