When a ds game is in game slot the ds says theres

The touch screen may be faulty but can be replaced. The SLOT 1 game slot may have bent pins or broken pins. Bent pins can be easily fixed (with care and patience) but replacing the SLOT 1 or the touch screen is quite difficult. It is probably repairable but only by someone who knows what they are doing.

The spring that holds the game in place is broken and needs to be replaced. at some point someone may have snatched the game out instead of pressing it in then ejecting it. Here is a link to another moms story about the DS http://headbonk.com/blog/2009/04/12/nds-silver-slot-1-repair-sort-of/ I hope this helps and I hope its just gunk stuck in the bottm of slot 1 thanks in advance for your feedback

If you need further help, reach me via phone at https://www.6ya.com/expert/eric_5b00a5ceab1c0cd2

Answer 1: Are you using AR (Action Replay) codes?
These can mess up games.

Answer 2: Is the Game(s)/System dusty? Blow in the slots to clean it out.

Answer 3: Have you dropped, Spilled, Or Damaged the system? These can also interfere with games.

Hope this helps!

It seams that the Slot 1 is broken then, you should contact nintendo about it or you could try to fix it your self if you have some basic soldering skills and warrante period ended.

the contacts where the game go got dirty or broken!, u will need to get it repaired

re-insert the games

theres probably dust or something stuck in the slot

it may be a technical difficulty in the gba slot try bowing in it or get a q tip and kinda dust it out or blow in the game becuse the game isint making any connections to the ds and with the charger thing if u push in the charger too hard you might mess up the reciving thing inside the ds so it wont get the charge so be very careful when it comes to ds.....if u have any more questions plz let me know

BLOW IN THE DS SLOT AN ON YOUR DS GAME IT PROBABLY HAS DUST IN THE SLOT I DO IT ALL THE TIME AND IT WORKS

check the connectors inside cartridge slot inside ds, verify if they are all aligned ( | | | | | ).

if any contact is bend, you must align it, also check for dirt or rust inside slot.

sometimes you will need to clean contacts inside. you must buy a cleaning kit to do it.