Technics SL-HD350 Cd Player - Sound problems

Please don't cut a cable, You won't be able to repair it. There must be a way to lose the cable without cutting. I forgot, but I will search around. When I find something I'll come back on this.

Technics CD Changer SL-MC400
The ERROR Is Cause By The Belt Drive
Remove The Cover And You Can See if
The Belt is Lose or slip of In Any Case
You Must Change That RUBBER DRIVE BELT.

The motor is shot,Or the gears are jamming up in it, Just look for a different one, It will cost you more to have it repaired, I have got good used disc (Players) For $10 to $40 at the most for friends of mine,

Technics SL DZ1200 MKII Mod Fixing Flawed Design DJ TechTools

A lot of issues with this unit

yes you can connect another cd player to the DAT input of your amp.
input connections like DAT, TUNER, CD, AUX etc (except phono) is just to differentiate between what sources are connected, the amp cannot tell what source is connected and will output the sound no problem.

as for the remote operation, if the 2 technics cd players are switched on at the same time they're going to do what you command from the remote together but you'll obviously be listening to 1 at a time.

The clicking is the lens attempting to focus on the CD. Try cleaning the lens using a cotton swab and alcohol. If that fails to resolve the problem, the optics will need to be replaced.

Dan

TRY NEW RCA JACKS

showing no disc and not playing when disc is in. when opened disc was not engaging

FOR RECIEVING SOUND FROM OTHER SOURCES,,LIKE A CD PLAYER,,,,YOU USE A RCA JACKS

it will need a manual cleaning of the laser lens