Wireless router unresponsive, no activity lights.

To secure your wireless network from unauthorized access, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

To change the channel, you need to loginto the router management page and click on the WLAN tab.

You can find the channel information under the WLAN tab. Change the channel ( channel 1 , 6 , 11 ) are the non overlapping channels and mostly prefered.

Here is the PDF file that shows how to reset the router if the password is forgotten.

http://downloads.trendnet.com/TEW-432BRP/FAQ/FAQ_TEW-432BRP.pdf

What brand is your router? Check for the IP address of the router and default password (should be written on the back of the device). Then type the IP address into the web browser on your main desctop in the kitchen like that for example http://192.168.0.1 enter the default username and pasword and you are in the router's menu.
Set up wireless connection SSID is the name of your network that will apear when you search it, do not change any of the default settings exept the SSID , enable, and select password. Use the WPA2 and type in your desired password and press SAVE . Then go to your bedroom and try to find the wireless network you've just created. And connect. Good Luck

you can connect your Ethernet cable from tew-432brp to MT800.

if serial ethernet cable not work you can check with cross cable of ehetrnet also.

It is because the Power adapter is not connected properly. If this happens again. Disconnect the power adapter cable from the router and from the power socket. Then connect it back again. The router will come on. It could also be because of power surge which might have stopped the system for a while

Hi,
Try with http://192.168.1.1 or http://192.168.0.1
I hope that this has been very helpful for you

i found out that since i have an older version of winxp 2000, i need to get a network adapter, to get this router going.

Upgrade the firmwire you will find-it on www.trendnet.com