Question about GE WPRB8050D Top Load Washer

2 Answers

How do I remove the front panel of a ge profile washer wprb8050d

Posted by mathuo on


2 Answers

Joe Julian

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.


    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Many GE washers have the front panel held on by two clips on the top edge. Take a stiff putty knife and insert it about 6" from the outside edge and smack it firmly. The clip should release. Do this on both sides. Pull the panel away, then lift it out of the bottom lip.

Posted on Dec 20, 2009


Steve Allison

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • GE Master
  • 5,569 Answers

That may not be possible; many units have connected front and sides that are removed as one piece by removing hardware in the back and inside the washer.

Posted on Oct 24, 2009


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Wiring diagram of pressure switch

All Ge washers should have a wiring diagram inside the control panel on the left side if standing in front of the machine. Hopefully it wasn't removed by someone.

Apr 01, 2015 | GE WPRB8050D Top Load Washer

1 Answer

Ge wprb8050d

when it stops filling
you fill it with a jug of water to the right level
then see what happens
if it goes past rinse
have a look at the water valve it needs to be changed

Jan 21, 2014 | Washing Machines

1 Answer

Ge profile front-load washer not draining

Firstly took the bottom front panel off and removed the drain plug/trap. Then the problem should be solved easily. For More information please visit Clothes Dryer Element .

Sep 22, 2012 | GE White Profile Series 15 Frontload...

1 Answer

GE PROFILE wprb8050. agitator will not spin. I removed and found the coupler is moving left to right, just will not turn agitaor. it appears to be loose? any suggest?


If you can easily spin that agaitor coupler free by hand..its stripped and needs to be replaced. The part number for it is WH49X10042 it could be purchased at your local appliance parts store or online at;


Aug 30, 2011 | GE WPRB8050D Top Load Washer

1 Answer

How do i remove the lid on a ge profile harmony washer?

Use a putty knife to remove the front panel first/
The putty knife will insert between thr top of the lid and the front panel about 2 inches in from each side.
The panel will pull forward then up to remove it.
Then remove the screws holding the lid down.
You may have to open the control console to remove the lid.

Apr 03, 2011 | GE Profile WPRE6100G Top Load Washer

2 Answers

My GE Profile WPRB8050D fills, drains and spins but won't agitate. It makes a sound, but doesn't move. What could be the problem?

These washer have a motor that runs clockwise and counter clockwise...for agotaion it runs one way and for spinning it runs the other...check if the motor is still getting power, but not running in the one direction...motor is probably bad...


May 02, 2010 | GE WPRB8050D Top Load Washer

1 Answer

I have a ge top load washer that the tub is off balance.

Open the control panel to get the mini manual. It will show how to remove the front panel and check the tub supports.

Feb 15, 2010 | GE Profile WPRE6100G Top Load Washer

Not finding what you are looking for?
GE WPRB8050D Top Load Washer Logo

386 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers


Level 3 Expert

85239 Answers


Level 3 Expert

4369 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides