MP players that play audio (talking) books

I know from reading the user manual that it is meant to play WMA
files but you may have to use the coby media manager to convert the files to mp3 or possibly to wma ( that the player can read )
I have similar problems with mp3 files that do not play in my car mp3 player .

MP3 players can only play music files in mp3 file format. You need to convert your CDs to mp3 music files onto yourcomputer or download them from the Internet and then copy them to your MP3player.
You can do this using Windows Media player and Rip the CDs - Media Player willcreate a MP3 music file for each music track.
Click on this link for instruction on converting music files to mp3 file format:-
http://www.fixya.com/support/r5798418-creating_transferring_mp3_music_files

Please get it here: www.driverslab.com/drivers/MP3/iRiver/15/56.html www.opendrivers.com/.../iriver-free-driver-download.html www.driverskit.com/freedownload/MP3/iRiver/..._/18888.html
Regards

Hi, You can download the driver here then : www.driverslab.com/drivers/MP3/iRiver/15/56.html
www.givemefile.net > ... > Audio player > MP3 Flash-player
Kind regards, Jay

Hello, Please get the driver here then : www.driverslab.com/drivers/MP3/iRiver/15/56.html
www.givemefile.net > ... > Audio player > MP3 Flash-player
Kind regards, Jay

Well, it all depends on the voltage of the charger. If your charger was to high of a voltage, it could have caused a surge and blown out the curcuit.

Hi, try this.
http://www.freewarefiles.com/Free-WMA-To-MP-Converter_program_17908.html

Yes, you need to convert all your movies to a format iRiver and understand and play.

Here's a link:
Movie Converter for iRiver and instructions

I'm not sure whether Movie Converter supports original DVD files. If that is not the case, then you'll have to convert DVD video into a format that iRiver X20 can use, and then feed that new video to Movie Converter.

However, that would be a bit redundant: to save on time and quality, you could use other video Conversion tools, such as SUPER:

http://www.erightsoft.com/SUPER.html

After loading your DVD, you set the parameters to mirror those accepted by your iRiver model. In case of iRiver X20, those parameters are:

Extension: AVI [[also known as container]]
Video Codec: WMV9 SP, MPEG-4 SP [[MPEG-4 = XVID, DIVX]]
Video Resolution: max 320 × 240
Video Framerate: max 30 fps
Video Bit Rate: max 512 kbps

After successful conversion, upload your new video file to your iRiver X20 and play it back. If it plays [and plays correctly] - then congratulations - it works! If it does not play, then you might have made a mistake while setting the output parameters in SUPER.

Hope it helps. Rate me. Thanks.

.:: Cyberneticus ::.

Hi frequency squeal = diode short-circuited

Must be replaced - cannot be repaired

Try to re-format it. on player go to settings, then advanced then format. select format, say yes and it should reboot. if that doesn't work you need to upgrade the firmware. got to iriveramerica.com, support, ultra portabale support and download firmware updater software.