Question about SVA-USA HD4208TIII-VR 42 in. Plasma Television

SVA HD4208T III pdp

I have and SVA Plasma and while my TV is on stanby i try to turn it on with my remote and you hear a click twice and the infrared light goes off and in order to reset the infrared light you have to turn off the power button and turn it back on. I have read some post that inform we need to replace some relays but where can i find them if this is the problem?
This is the post i read:
Just Repaired a HD4208-III with the same problem, found faulty
Relay RLY8002 (Faulty Contacts) Replace both RLY8001 &
RLY8002.

Vampier Oct 08, 2008

Same problem. I checked the mentioned relays. When the TV powers up through the remote both relays turn on and the green lights next to them turn on as well. After a few seconds the red alarm LED on the board comes and and turns the relays back off. A power reset through the power button is needed before I can try again.
Anonymous Jan 08, 2009

I checked the mentioned relays. When the TV powers up through the
remote both relays turn on and the green lights next to them turn on as
well. After a few seconds the red alarm LED on the board comes and and
turns the relays back off. A power reset through the power button is
needed before I can try again.

4 Related Answers

trunking

2 Answers

SOURCE: SVA HD4208 42INCH Plasma will not turn on.

I called the factory or the distributor or wholesaler (customer service) that comes out on the web and they told to just buy a new remote cuz tv just isn't recognizing the remote. Can this be true? If this is far from being true, where do I buy the boards and what are the chances that the boards are the real problem?
thanks once again.
Trunking.

Posted on Feb 12, 2008

Anonymous

104 Answers

SOURCE: Need help desperately!!!

A rolling picture means it is either not getting a good signal (possibly a bad cable or connection), or it is receiving interferrence from another device you have connected. Try disconnecting other devices or turn the power off to other devices and see if the rolling goes away. If you have Y cables connecting two devices it can cause this kind of interferrence even if the second device is not turned on.

Posted on Mar 09, 2008

Anonymous

9 Answers

SOURCE: SVA POWER SUPPLY

Wehave identified a common problems with theses sets manufactured by,SVA, Gateway, Viewsonic, Sampo and a few other brands. They all have aSamsung power supply board (LJ44-00025A), which has cause these unitsto lose power. There is a easy fix, replace the power board. But youask why should we? That's the right question. If these boards all havethe ability to fail with various parts and within various displays.This has to be a defective part. As of now, there is no recall on thispart. Therefore, we are generating a list of customers, who own thesedisplays and are requesting a refund for previously purchased parts ora replacement part at no cost to the customer. We are in the prelimary stages, so please be patient with our efforts.

Ifhave indentified your unit is salvage by an power issue an wish topurchase the indentified part (LJ44-00025A, we recommend you purchasefrom http://www.adc-ast.com/.

We cannot guarantee that any monies will be refunded by this claim.

Thanks
Shawn Moffett
Samsung Claims Administrator

If you are interested in participating in this claim, please email the requested below to [email protected]

<NAME>
<ADDRESS>
<PHONE>
<EMAIL>
<MODEL>

Posted on Apr 06, 2009

Anonymous

1 Answer

SOURCE: SVA PLASMA TV

I got this same tv from a guy in my area he would press the poewer botton on the tv and the standby light comes on and then turns off, so he gave me the tv for free i took the back panel off, and everytime i press the power botton the green light came on where the screen board is and went back off after i let the botton go i took the power board out took it to a repair shop to see if there was anything a wrong with it everything was good so i replaced the two fuses on the board and the one on the screen board, i had a feeling about the power switch so i jumped the wires on the switch purple to purple and green to green, I put it back together pluged it in the standby light came and stays on now, so i went out and got a universal remote for the sva at walmart for $15 programed it and pressto the tv works perfect so three fuses $3.60 two small pieces of wire and ele tape $0 my time 35 mins = one working plasma for $3.60 so when you have this problem like everyone else check the power botton switch, there cheap and check the fuses theres only three and if that dont work idk what to tell ya. and you do need a remote or tv wont work.

Posted on Apr 09, 2009