How do I scan slides? - HP ScanJet 3970 Flatbed Scanner

It's possible that the scanner is not correctly detecting the slide frame size or that the slide is not positioned correctly on the scanner bed. Here are some things you can try to troubleshoot the issue:

1. Check the slide holder: Make sure that the slide holder is properly aligned with the scanner bed and that it's not blocking the edges of the slide.
2. Clean the scanner bed: Make sure that the scanner bed is clean and free of any dust or debris that might be interfering with the scanning process.
3. Adjust the scanning settings: Try adjusting the scanning settings to ensure that the scanner is set to scan the full frame of the slide. Look for options such as "auto detect slide size" or "manual crop" to adjust the scanning area.
4. Use a different scanning software: If the issue persists, try using a different scanning software to see if that resolves the problem.
5. Check for firmware updates: Make sure that your scanner's firmware is up to date. You can check the manufacturer's website for any available updates or patches.

If none of these solutions work, you may need to contact the manufacturer's customer support for further assistance.

Yes, the Brother MFC-2690DW can scan photo slides. It is capable of scanning a range of documents and media, including photos and slides, in both black and white and color. The Brother MFC-2690DW also comes with a range of software which can be used to automatically adjust the quality of the images and scan them into digital formats such as JPEG or TIFF. Additionally, you can use the Brother MFC-2690DW to scan and digitize slides directly into a computer or other digital device, allowing you to easily store and share your images.

This multi function printer/scanner cannot scan 35mm slides and negatives.
Some flat bed scanners with a lighr scource that shines through 35 mm slides and negatives can scan them.
You will be better off getting a dedicated 35 mm slide/negative scanner.
Check out this WEB site foe slide scanners.
http://www.google.com.au/#q=35mm+slide+scanner&hl=en&prmd=imvns&source=univ&tbm=shop&tbo=u&sa=X&ei=dYFIUPKBKMSyiQedl4G4DQ&ved=0CEkQrQQ&bav=on.2,or.r_gc.r_pw.r_qf.&fp=4469b7ccc4340a33&biw=1016&bih=535

This model Canon MX700 cannot scan slides.
A flat bed scanner that can scan slides and negatives has a light scource that shines through the slide and negative fand is detected by the scanner sensor.
I suggest you purchase a slide scanner, it will be cheaper that getting a new flat bed scanner with slide capability.

Use the advanced scanning option. Your get much more control over what you scan.

slide scan is not an option on that model. slide scanner is an option in some models of scanners. I have a HP one as most HP scanners have the setting built into the scan firmware that lowers and higher the light to get correct scan. brother model will not do this its just normal scan setting.

double click the HP solution center open the scanner lid remove the TMA cover (transparent material adapter) by pulling the cover up place the slides onto the slide holder insert the slides w the top of the slides pointing up and the front of the slide facing you close the lid press the scan film in the HP dialog box select picture select scan positive, and select TMA click scan
goodluck
cheers

The mounted slide scanning option is set for scanning 35mm mounted slides (24mm x 36mm). As far as I know there is no way to change this setting. You may want to try using the film scan option, do a preview scan, and then crop each individual slide for the final scan.

SOUNDS LIKE A SOFTWARE CONFLICT.BUT IM NOT SURE

have you tried checking for a firmware update from the manufacturer?