How can i administrate a cajun p115g because it dosn´t have a console port?

cajun manual and parts manufactures

www.bbcboards.net > BBC Boards > Bass Boat Forums > Cajun Boats

Jul 18, 2011 - 13 posts - ‎11 authors
... for cajun boats and also a complete manual in pdf format and wiring schematics. ...bassmannbama is offline ... a wiring diagram too because switches arent working andmy wiring ... My email is : [email protected].

Cajun Boats Owner's Manual 1992+ available on pdf

www.bbcboards.net > BBC Boards > Bass Boat Forums > Cajun Boats

Apr 19, 2012 - 4 posts - ‎4 authors
I scanned in my owner's manual and have it available if anyone is ... Mine is a '95 1950 Fish n Ski, but I believe it would cover bass boats as well. ... Looks like I'll need to learn about electrical and general boat repair.

make sure its updated?try running it as administrator your firewall or anti virus IP maybe blocking it check all three to see if IP is blocking it use the USB port if it dosn't work trough that your IP is blocking it try reinstalling it follow instruction don't just click next read what it says. it may ask do you want to run as adminnistrator

Your WIFI connector may be turned off go into your connections and see if not something may have turned it off a program or a virus or hack try restoring your computer to the day it was working or before and see if that fixes it if it does it was turned off by something. I would try to remember what you downloaded or installed and see if that caused it.

Hello!

I don´t understand, are you install the driver for printer, if you not you can find driver on hp site.
If you have driver for printer, and they dosn´t work, set you printer as default and chek you USB cable.
If you can´t find driver just ask, and I will give you URL.

First reset yours by the Back button;

If not solved;

Reset again by the button, the On the Computer by Fat32 Format, and then Copy the Initial Files that were on your MD when you Bought;

Good luck

cajun switches have pretty similar command structure as cisco. use the ? mark for help.

Not sure what Cat switches you have, but the cajun switch must use the same trunking encapsulation.  Older catalyst switches use ISL trunking which only work with Cisco switches.  Make the port between the lucent and cisco dot1q encapsulation on the cisco trunk port.  Also turn on debugging on the cisco and see what messages are generated.

I have 2 printers that dosn´t work. Brother HL-5250 dn One with fuser that dosn´t work. Can I take thee fuser from the other and attach it into the first one. Or do you ned spcial tools and knowldge to do it?
[email protected]

All info from juliankov appears good.. but thought I'd add a bit of stuff I found on a web site..

http://www.tek-tips.com/viewthread.cfm?qid=300461&page=2

Use a console cable with following minimum pinout (the flat gray one with the RJ45- D9 type converter currently shipping with new P33xx switches will suffice): DB9 Console Port
1 ----------- 6
2 ----------- 3
3 ----------- 2
4 ----------- 4
5 ----------- 5
6
7 ----------- 8
8 ----------- 7
9

Obviously the speed is set to 9600
maybe stop all sessions & try to re-establish a new one. The instruction manual warns u can only run one..

This is from the Cajun P333R manual but it should be very similar if not identical.

Good Luck.

arp timeout Command
Use the arp timeout command to configure the amount of time that an entry
remains in the ARP cache. To restore the default value, 14400, use the no form of
this command.
The syntax for this command is: arp timeout <seconds>
The syntax for the no form of this command is: no arp timeout <seconds>
Examples:
To set the arp timeout to one hour:
Router(configure)# arp timeout 3600
To restore the default arp timeout:
Router(configure)# no arp timeout
ip-address IP address, in dotted decimal format, of the station
hardware-address 48-bit address of the local data link
seconds The amount of time, in seconds, that an entry
remains in the arp cache.