Question about Harman Multimedia AVR 745 Receiver

1 Answer

Cant get rear speakers to Work AVR 745 7.2 Surround!!!

Hello all,

I am very frustrated... I have an avr 745 and have 7 speakers hooked up to it but only one sub. When i go to the source selector I can only get 5.1 surround modes and havent ever heard sound coming from the rear speakers.

I dont have the reciever hooked up to a TV just my computer and turntable. I would very much like to run the reciever at full capacity can someone help me achieve this?

Posted by HarmanBoy on

  • grado Dec 30, 2007

    I have it again & now OSD is inop (7.1 for my system).

    Regarding your problem, are you using software version 4.16? Harman lists a 'reboot' if that doesn't work, a software
    reset of the microprocessor before going to a service center. Note, the processor reset erases all of your
    configuration settings (bummer).

×

Ad

1 Answer

Anonymous

Another way to solve this rear speakers problems is to go to the equalizer and have the system recognizes the sound coming out of all speakers. The AVR 745 comes with a microphone on the stick, using that to run the manual equalizer. It is the manual equalizer will set the rear speakers.

Posted on Apr 03, 2008

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MY AVR 745 IS NOT COMMUNICATING WITH THE SPEAKERS


Try resetting the receiver as suggested by milner_greg here:


AVR 745 Firmware upgrade

Jan 30, 2018 | The Audio Players & Recorders

1 Answer

I have a active sub woofer (akari bazooka) but the only connections available are the speaker connections. The front of the sub woofer has volume adjustment. How can I connect this sub woofer to my Harman...


hi,
You can't connect the pre out of your AVR to this sub woofer. Do one thing connect the frond left/ right channel speaker "B" out of harman kardon to the sub woofers left right speaker in put. you can connect the speaker out "A" to your normal left right speakers. Remember to switch Speaker "A" and "B" in ON position in your AVR. Also do one thing go to the speaker setup of AVR and switch OFF (slelect NONE) the sub woofer.This will disconnect the sub woofer pre our and the sub frequency will mix with frond left right channels.
ok

May 20, 2011 | Harman Kardon AVR 135 Receiver

1 Answer

The small speakers produce sound but the sub


I have Boston BA745 speakers and want to use them with my new HP Pavillion Elite HPE computer. How do I get them to work?

Dec 27, 2009 | Boston Acoustics BA745 Computer Speakers

1 Answer

I am planning on buying Denon AVR 1909 receiver. Can hook it up with Bose Acoustimass 6 speakers. DOes the Denon blow up the small bose speakers. If yes how do i hook them up.


on the am 6 by bose you have to use all the supplied cables or you will blow them. the way it works is that all the speaker signal/power from the denon goes directly to the sub, then the sub sends the signal to each speaker. if you do this correctly the sub takes what it needs and sends the rest to the smaller speakers. and you wont blow them unless you hook them directly to your reciever.

Jul 30, 2009 | Audio Players & Recorders

3 Answers

I want to get full surround sound out of my Denon AVR-1508 w/sub


hi there might be some problem with the link that u have hooked up with the speakers.

Jan 18, 2009 | Denon AVR-1508 Receiver

1 Answer

Learning remote codes for my harmon kardon avr354


a) Place the two remotes so that their IR transmitters face each other
end to end, separated by about one inch. The
AVR 354 remote’s transmitter also serves as an IR receiver during
the learning process.– AVR 354 and Original Remote Head-to-Head

b) Press the Source Selector for the device mode you wish to learn
a code into, and place the AVR 354 remote in Learning mode by
pressing and holding the Learn Button until the Source Selector lights
up, then release.

Learning Remote Commands

c) Press the button on the AVR 350 remote you wish to program with
the new code, and the Source Selector will flash once. You may
learn a new code into the following buttons: Device Power On/Off,
Alphanumeric Keys, Last Button, Back/Exit Button, Menu Button, Navigation Buttons, OK Button, Disc Menu Button,
the four Teletext Buttons, Channel Up/Down, Volume Up/Down,
Mute and the Transport Controls (including Record).

d) Press and hold the button on the device’s original remote whose
code you wish to “learn” until the Source Selector flashes three
times, then release.

e) You may program additional buttons by repeating steps c) and d).
Press the Learn Button once to exit Learning mode, or wait for the
remote to “time out” and exit Learning mode on its own after about
30 seconds.

Dec 11, 2008 | Harman Kardon Harmon Kardon SoundStick II...

1 Answer

Speaker hook up


Shari,

It is my hope that I can help. This applies to the type of sound card on your PC.

- If you have a 2-channel sound card: Select 2 on the source selector switch on the subwoofer. Connect the green plug from the audio input cable to tyhe front jack on your PC sound card. With this input setting, your speakers will upmix the 4-channel signal and create a center signal for your speakers.

- If you have a 4-channel sound card: Select '4' on the source selector switch on the subwoofer. Connect the colored jacks on the audio input cable to the jacks on your PC sound card, making sure to match the colors.

- If you have a '6'-channel sound card: Select '5-1' on the source selector switch on the subwoofer. Connect the colored jacks on the audio input cable to the jacks on your PC sound card, making sure to match the colors.

Your sound card is located on the back of your PC Tower.

Good luck

Jun 24, 2008 | Logitech Z-5300 Computer Speakers

3 Answers

Two amp


I don't know why you'd set the Peavey to 2 ohm to drive 8 ohm speakers??? My other thought is... I wonder if the phase is correct. try reversing one of the speaker wires Left or right side.

Geno

Feb 27, 2008 | Harman Kardon AVR 630 Receiver

Not finding what you are looking for?
Harman Multimedia AVR 745 Receiver Logo

281 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harman Multimedia Audio Players & Recorders Experts

Brad Brown

Level 3 Expert

18438 Answers

Tom Chichester

Level 3 Expert

57312 Answers

Bill Boyd

Level 3 Expert

53816 Answers

Are you a Harman Multimedia Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...