Sharp ux-bd90 Please explain the meaning of message "no service"

try this site


http://www.sharp-world.com/restricted/products/copier/downloads/select_us.html

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

check to see how much memory you have for the fax. Most of the time you can add more memory. see the user manual for instructions

Click on the link below to view the Sharp UX 108 user manual. Inside this manual it will show you how to change the language:
http://www.scribd.com/doc/31544424/Sharp-UX-108-UX-178-UX-188-User-Guide

simple hit the " < or .> "I call these the arrow keys once you do this you will see the ringer go louder or softer to your ideal preference. and once you select your preference your Done

Press arrow down on the handset, 3 times. Diplays ' 3 RING' Press arrow right once and arrow down twice. Displays '33 SILENT' Press arrow right once. Displays 'OFF' Press arrow up or down to select ON or Off then press arrow right. Displays 'DONE' Press arrow left repeatedly to exit menu.

Verify that you have a dial-tone by plugging a regular phone into the wall jack

Make sure the phone cord is plugged into the LINE jack..

Dial the number from a regular phone and listen for fax tones.

http://www.sharpusa.com/files/fax_man_UXB20.pdf

Just lower the volume till off

No unless there is a switch to adjust the volume turn that right down if nopt no you can't do that

Hope this helps - Josh Howard

Please help. Can Sharp UX-BD90 tel/fax machine be set to mute incoming calls?

Thankyou.