The three digit code to program my Coby TV to use iO cablevision (Long Island)is not listed. Does anyone know the three digit code to program a Coby TV to use the silver iO remote for Cablevision?

0281,0288,0284. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name" in alphabetical order. Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box.
http://electronicshelponline.blogspot.com/
http://remotesearch.blogspot.com/
http://electro-medical.blogspot.com/
http://electrohelponline.blogspot.com/

Hello
Codes for Curtis TV with Cablevison remote control are:-

070 004 101 127 236 011 072 081 120 164

*Tip: The iO button will light on for 20 seconds. The

next step must be entered while the iO button is
on.

STEP2 Press the [INFO] button.

The iO button will blink number of times indicating the

number of each digit of the code number. Each digit is

separated by a 1 second interval of the iO button being

turned off.

Example :One blink, three blinks and eight blinks with

an interval of 1 second of iO button being

turned off, indicates the code number 138.

Note :Ten blinks is equal to the number 0.

D. Program the Volume Controls.

By following the steps below, the user can program

the volume controls (Volume UP, Volume Down and

MUTE) . The default volume control settings on the

remote control is TV volume control. If you wish you

can control the volume via your CABLE box, use the

following steps.

STEP1 Press the [CBL] button and the [SEL] button

simultaneously for 3 seconds. The iO button

will turn on.

*Tip : The iO button will light on for 20 seconds.

The next step must be entered while the

iO button is on.

STEP2 Press the [VOL +] button.

STEP3 Press the [CBL] button.

The iO button will blink twice to confirm the

programming.

To return to original state:

If you wish you can control the volume via your TV,
repeat the above steps by pressing [TV] in STEP3 .
OK.

Here's the instructions and codes plus an alternative method if one of the codes below do not work.

Three-Digit Code Programming Method:

1. Turn on the TV.
   
   
2. Press and hold the TV and DONE buttons simultaneously for 3 seconds. The iO button will light.
   
   
3. With the iO button lit, point the remote at the TV and enter the TV's three-digit code (see code table below). The TV will shut off when the correct code is entered.
   
   
4. Verify by pressing the SEL button. This should turn the TV on and off.
   
   
5. Press the TV button to store the three-digit code. The iO button will blink twice to confirm that the code is stored.

Codes: 007, 053, 057, 082, 020, 239

Auto Search Programming Method Use this method if the three-digit code method does not successfully program your remote control:

1. Turn on the TV.
   
   
2. Press the CBL and DONE buttons simultaneously for 3 seconds. The iO button will light.
   
   
3. Hold down CH+ and release it as soon as the TV powers off.
   
   
4. Press CH- five times (the television may or may not turn on again as you do this). If the television does not power, turn it on manually before proceeding.
   
   
5. Press CH+ one at a time until the television shuts off.
   
   
6. Press TV to save the code.

To save time, the Auto-Scan function is trying codes as fast as possible while CH+ is being held down. It scans so fast that you may pass the desired code while holding down the CH+ button. Steps 4-5 allow you fine tune the auto-scan so you reach the correct code.

You have to do the universal way which involves:
1) turn on tv and dvr
2) press tv button + select, hold till the io button stays lit (5seconds)
3) once io button is lit, press up and down channel buttons and flip through them until the tv turns off.
4) press mute, this should turn the tv on.
5) press tv button to save the settings (turn off tv)

Try 1548 or 11548.

The batteries in the remote may be weak. replace
The transmission window on the remote may be blocked, or the Infra-red diode may be inoperative. No digital signal is leaving the remote. The receiver window on the TV may be blocked, remove obstruction.

Differential test. Does another remote control the tv? If you don't have one remember that the app "Peel Remote" for your smartphone may be used. Does your remote work on other electronic devices? If either is no then that is where your first problem lies.

Please send the model of your remote thank you.

Hello Monica24g. I also have Cablevision and found the codes I was looking for. I assume you have an Audiovox (fpe1907) television. Here are some codes you can try: 076 103 043 035 224 228 078. Press the "TV" button and the "SELECT" simultaneously for 3 seconds. The IO button will light up. Enter one of the codes, then press the "TV" button again. I hope this helps!

Hello Monica24g. I also have Cablevision and found the codes I was looking for. I assume you have an Audiovox (fpe1907) television. Here are some codes you can try: 076 103 043 035 224 228 078. Press the "TV" button and the "SELECT" simultaneously for 3 seconds. The IO button will light up. Enter one of the codes, then press the "TV" button again. I hope this helps!

I need the name and model number of the remote control, please.