At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Is there any motor noise? Any clue if the mortor is running but the drum is not turning? Your drum belt is broke or has fallen off. Either way you have to replace your drum belt.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
see this cause: It spins, but doesn't pump drain line clogged, +remove some sock with pliers maybe you can remove the agitator+pumps propeller defective. It doesn't spin or pump frozen pulley pump, replace the pump It pumps, but the water returns improve the drain line+if the drain line reach more 4 inches, cut of the excess. if is lower,install air/gap siphon break assembly.
More than likely a bad timer assembly. They are usually easy enough to replace if you have basic mechanical skills. The part can be ordered from repairclinic.com.
Hello, try to use a thin object and spin the fan blade, if this getsnthe fan going then most likely the capacitor is bad and must be replaced. If this does not get the fan going then the motor is shot.
This sounds like a bad control module, run the car until it dies then remove a sparkplug wire from a sparkplug and stick a screwdriver into it and place it near a ground then have someone spin the key as you watch for spark, if theres no spark then i would say its a bad ignition control module. this is common, when it gets hot is dies out, you can even remove it and have it tested at an auto parts store just make sure they test it a few times to get it hot. good day.
Symptoms would lead me to the coil. They get hot, and die. If it doesn't re-start hot but will after cooling down then its a 99% coil issue
Also after it shuts down and u turn the key to try to start it back up is the starter engaging and trying to spin the motor or are you getting nothing. If the starter isn't doing anything it could be the starter or relay between ignition switch and starter. If the starter is engaging and the motor is trying to turn over it could a weak starter or it could be a build up of compression not letting the starter spin it over that a valve adjustment would help. The temp change from cold to hot is sometimes enough make the valves expand and not open enough to release compression for start up.
On the refrigerator and after sometime hold the condenser to see if it is hot, if it doesn't become hot then there is no refrigerant in the system there must be a leakage somewhere or it could be the compressor which is losing compression or doesn't pump well.
Check the motor/belt for proper function
×