How do I decrease the amount of green in the picture?

If your TV has a color temperature setting; it is probably on medium. Try it on warm. This will decrease the amount of green and increase the red.

Otherwise you will need access to the tint/hue controls; adjusting it more toward red will help.

It's the T-Con board
TV Parts Universal TV Stands DLP Chips ShopJimmy will have the parts you need.

I have a good but with green tint on a polaroid tv model number 64SX505Y-DC02

Maby its not tuned in the channel right
maby its the way the picture is

or try

turning the tv of for 40 minutes by the power point and back on that way it will reset all picture - and should go back to normal please let me now how this goes's

Make sure you un plugged it by the power point

Heres the best way to set a phillips screen controls. Go into the picture controls and set picture or contrast to roughly 75%, then set brightness to 50% and then set the color level completely off. Then adjust the screen with the 3 color controls untill you recieve the best black and white picture as possible. If you are unable to achieve a good black and white picture change the coolant in the green and blue tubes. But if you can get a good black and white picture stop there then turn your color level back up and the picture should be correct. Let me know if you need further assistance.

Problem solved. I tried playing DVD and the TV picture was fine. So I double-checked cable wires from cable box - one of the wires was loose (obviously it was the red color input). After tightening, the TV picture is good as new.

actually when JVC tv's turn green the light engine is going bad. I repair lots and lots of these. The engine can be rebuild for about $500 installed. IT is a known problem for us tv techs. I have 1 engine left if you know a tech who can install it. These sell for $300. This fixes the problem which is the green chip color breaking down and smearing. All whites look green. The best way to tell is to turn the color all the way down and see if you still see green tint. It works best on a black and whit picture if poss. but any will do. Usally it shows more in one section on the picture but is green all over. my number is 270-996-7629 if you have any questions.

The problem with the set is that the blue gun has gone weak, and not emitting at par with red and green guns in your picture tube. Turn of the blue screen and get the grainy display on the screen (detach the cable) and enter into service mode to fine tune until you get a perfect or black and white grain pattern.

well i had the same t.v. and u will have to set the picture tube which is really simple it ight seem hard but if you need an hand give me an call 1-403-362-2560 and ask for jason

check your lamp it might have gone bad if not then on these sets the color wheel goes bad if you get junk on the screen like broken bits of info and you might get a weird sound like computer noise then it might be your color wheel it is a small round glass wheel i just checked to see if your model is in this list of samsung color wheel and yes it is