Brake on quinny buzz will not engaged - Quinny BUZZ 3 Jogger

Hi Michael

If the product is under 28 days old please return it to retailer with proof of purchase and they may offer an exchange (this is at the discretion of the retailer) If not then you would need to return it to the retailer for them to send into our engineers for inspection & repair.

You may also find the Buzz brake adjustment assists in resolving the situation for you.

Hi

The Quinny Buzz brakes can be adjusted (and should be periodically as part of the ongoing maintenance of the product to ensure good performance)

The brakes may require periodic adjustment. To do this, use two 8mm spanners to unlock the lock nut from the long barrel nut. Adjust the brake cable and retighten the lock nut. Test the brakes to ensure a positive engagement and disengagement after adjustment.

sounds like a cable problem

____ QUINNYSALES ___ SPARES/REPAIRS 07886531199 TRY WD40 ALL OVER THE AREA WHERE THE BRAKE PEDAL COMES OUT ,ITS PROBABLY SIEZED UP

Hi you need to buy a new brake system which you can get on ebay cheaply. regards Marie

Hi, apply the brake.
Go round to front of buggy.
Hold the 2 large grey buttons on side of frame.
1 pushes down 1 pushes forwards do this & pull buggy down towards you, this will fold it as long as the brake is on.

Hi you need to apply the brake 1st. then stand at the front, there is 2 grey buttons either side of the seat on the 2 round bits. 1 you push down the other you slide forwards, keep hold of them & pull it downwards towards your feet. This will then fold down.

Hi the red button is for putting the brake on the grey is for taking it off, these are located near the back wheels

Contact Quinny directly via their parent website www.dorel.co.uk/contact-us
The frame has a 2 year warranty so they should be able to help

Hi yes I have 1 [email protected]