Question about Dishwashers
I have a maytag quiet series 200 dishwasher. It won't start; there are no lights on. If I hit the cycle select button the hi temp wash light and the heated dry light comes on but nothing else happens.
I had the same problem, and you can usually reset the board. The panel is probably going bad, but this solution will often work as long as you only want the basic, normal cycle. I have a Legacy Series Maytag Quietseries 200, and you can reset the panel by pushing and holding the "start" button until the lights flash and the cycle begins. Just realize that once it resets, you will have to let it run the full cycle.
Posted on Nov 18, 2011
I DO NOT HAVE A SOLUTION. A HANDYMAN CAME AND SAID IT COULD BE THE MOTOR THAT STOPPED WORKING. HE TRIED TO RACK THE MOTOR BUT WON'T MOVE.
WHAT IS THE EQUIVALENT IN SIZE OF THE QUIET SERIES 200? i MAY NEED TO REPLACE THE WHOLE UNIT. THE DIMENSION IS 23.5" W X 23" DEPTH X 30" HIGH.
Posted on May 06, 2013
I had a similar problem. I'd get no lights at all when pressing buttons, only an occasional "delay" light would go on but I couldn't get it to run. This would happen on and off for months. I took the thing apart, noticed the ribbon between the buttons and circuiyboard looked like it had a rusty or burnt spot in it. I put everything back together and the thing worked. Maybe something was loose somewhere.
Posted on Aug 16, 2012
Tips for a great answer:
Jul 30, 2018 | Maytag Dishwashers
Feb 05, 2011 | Maytag Dishwasher
Nov 07, 2009 | Maytag 24 in. MDB9750AW Dishwasher
Jun 05, 2009 | Maytag 24 in. MDB7601AWS Stainless Steel...
Apr 05, 2009 | Dishwashers
Dec 16, 2008 | KitchenAid 24 in. KUDI02IRBS Stainless...
Sep 15, 2008 | KitchenAid 24 in. KUDI02IRBS Stainless...
Sep 13, 2008 | Maytag Dishwashers
Jan 13, 2008 | Maytag 24 in. MDBH950AWS Built-in...
4,779 people viewed this question
Usually answered in minutes!