Question about Rheem 65 GAL ELEC Water Heater 6YR Self Clean 82V662

1 Answer

Our electric water heater doesn't work.

We noticed that earlier in the week, the hot water was not coming out as hot. And yesterday while bathing our kids, the hot water was not working at all. We tried emptying out the water from the water heater and replacing the "Screw-in water heater element" it looks like some coil steel wires of some sort. Well even after we replaced them (2), the hot water still doesn't come out. We need help!

Water heather information: It's electric, 4 years old, Rheem water heater 65 gallon model number 82v66-2

Posted by sanchez78748 on

Ad

1 Answer

Steve Wood Plumbing and Heating

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 21 Answers

Make sure it is wired correctly, check circuit breaker, check breaker built on to element. If all fails, and it is determined your not getting power to it, you may need a electrician. Be careful. good luck.
Steve

Posted on Oct 11, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

No hot water , no heater


No Hot Water - Electric Water Heater Troubleshooting

www.whirlpoolwaterheaters.com/owner-center/.../no-hot-water/
Whirlpool's video explaining potential reasons your water heater is not working ... Troubleshooting and Repair · No Hot Water (Video) · Replacing a Heating ...

Electric Water Heater Repair and Troubleshooting ' Whirlpool

www.whirlpoolwaterheaters.com/owner.../troubleshooting-repair/
Troubleshooting and Repair of a Standard Electric Water Heater. No Hot Water ... Not getting power is a common reason new water heaters don't work.

Troubleshooting Electric Water Heaters in MINUTES ~ Step ...

? 7:01
https://www.youtube.com/watch?v=SlyStHM9Nr0
Oct 4, 2013 - Uploaded by electronicsNmore
My tenant has a electric 30 gallon water tank. cimarron by Reheem. model ... So if u notice your water is overly hot and then notice no hot water ...

Dec 26, 2015 | Water Water Heaters

2 Answers

Water only stays hot for about 5 min or


Gas or electric?
Electric water heater ... then test for crossover, check for water leak, replace thermostats, test elements
Gas water heater ... test for crossover, check for water leak
http://waterheatertimer.org/Crossover.html

http://waterheatertimer.org/How-to-replace-thermostat-on-electric-water-heater.html


http://waterheatertimer.org/How-to-test-water-heater-element.html

water leak: turn off all taps and put ear against pipe and listen for water leak... check if water meter advances when all water taps are off.

Gene

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Oct 09, 2014 | Water Heaters

1 Answer

MY Rheem 81SV40D Water Heater (47 gal) does not heat enough water. Approximately one bath worth.


You have dual-element 240Volt electric water heater.
Since you have some hot water, then we know upper element is good, and that circuit breaker and electricity to water heater are good.
Not enough hot water is probably bad lower element, and possibly sediment build-up in bottom of tank.
Test element:
http://waterheatertimer.org/How-to-test-water-heater-element.html
Replace 4500 watt element available at local hardware, and clean out bottom of tank:
http://waterheatertimer.org/How-to-replace-water-heater-element.html

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Oct 07, 2012 | Rheem Tankless Hot Water Heater...

1 Answer

Model 71-52DB 50 gal. water heater stopped heating


Press the reset button located on upper thermostat
Following link has troubleshoot for electric water heater
http://waterheatertimer.org/How-to-troubleshoot-electric-problems-with-water-heater.html

Gene

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Jun 13, 2012 | Rheem Water Heaters

1 Answer

I have an electric Hot water heater with two elements. A few months ago we replaced the pop off valve and a year ago we replaced the thermostat.Since yesterday, we have not hot water. So my husband...


Replace the melted part.

If tank is popping breaker, then the melted part has a short circuit.
http://waterheatertimer.org/How-to-troubleshoot-electric-problems-with-water-heater.html
When replacing thermostats, I usually replace both of them
http://waterheatertimer.org/How-to-replace-thermostat-on-electric-water-heater.html

There are 5 basic parts to electric water heater.
Electricity to water heater.
Upper thermostat
Upper element
Lower thermostat
Lower element
It sounds like electricity is good.
Elements are probably good if just replaced, but one of them could have a short.
Thermostat is melted, so replace it and see if it restores hot water.
If not, then take 40 minutes and do complete troubleshoot as shown in link above.

Add a comment for more free help.
Also take advantage of fixya phone service.
For a price, expert speaks with you over phone while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Jan 16, 2011 | Rheem Water Heaters

1 Answer

How do you set tempature to make the water stay hotter longer? I have a Rheem 82v66 2 (65 gal) and cant fill my bath tub with out running out of hot water.


65 gallon water heater should fill more than 1 bathtub since typical bath only uses 12-14 gallons hot water. First hour delivery on your tank should be greater than 60 gallons.
http://waterheatertimer.org/Hot-water-use-chart.html

Since you have such a small amount of hot water, it sounds like bottom element is burned out, or one of the thermostats is bad. There are two thermostats, and two 4500 Watt elements on 65 gallon tank.
If upper element was burned out, or water heater was not getting 240V electricity, then you would have NO hot water. So we know upper element is good and circuit is good.

Ordinary tank-type electric water heater is fully repairable by homeowner and parts are available at hardware or home center.
I suggest taking 30 minutes and doing troubleshoot before replacing any parts.
Buy cheap multimeter from home center.
When testing voltage, rotate multimeter dial to 240-250-277 VAC
When testing elements or continuity, rotate dial to Ohms.
http://waterheatertimer.org/How-to-troubleshoot-electric-problems-with-water-heater.html

Add a comment for more free help. I can answer questions as you fix the water heater.
Also take advantage of fixya phone service.
For a price, fixya expert speaks with you over phone while you work on heater.

Jan 11, 2011 | Rheem 65 GAL ELEC Water Heater 6YR Self...

2 Answers

No water pressure in bath tub after turning off hot water heater


It could be back flowing into the hot water heater tank which is not full because of the leak. Even though the valve is closed on the cold water entry side, there is probably no valve on the exit side. That is how it is returning to the tank.

Sep 14, 2009 | Rheem 40 GAL ELEC TALL Water Heater 6YR SC...

Not finding what you are looking for?
Rheem 65 GAL ELEC Water Heater 6YR Self Clean 82V662 Logo

Related Topics:

387 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rheem Water Heaters Experts

Brad Brown

Level 3 Expert

18591 Answers

Bill Johnson

Level 2 Expert

306 Answers

jdthefixer

Level 3 Expert

747 Answers

Are you a Rheem Water Heater Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...