I need to change the door seal, any advice?? - Siemens WM5487A Front Load Washer

This video will show you how to change a door seal on this bosch

Please check on the link below for tips to change the seal and bearings.
Video on changing bearings:

http://www.espares.co.uk/advice/washing-machines/a/7/1401/how-to-replace-the-bearings-on-a-washing-mach.html
Video on changing Seal:
http://www.espares.co.uk/advice/washing-machines/a/7/1397/how-to-replace-the-door-seal-on-a-washing-mac.html

Please check on the link below:
http://www.espares.co.uk/advice/washing-machines/a/7/1397/how-to-replace-the-door-seal-on-a-washing-mac.htmlheck

for tips and ways to change the gasket.

http://www.espares.co.uk/advice/washing-machines/a/7/1394/how-to-replace-the-door-seal-on-a-washing-mac.html

Please check on the link below for tips to change the door seal.:


http://www.espares.co.uk/advice/washing-machines/a/7/1397/how-to-replace-the-door-seal-on-a-washing-mac.html

Please check on the link below for tips to see a demo of a door seal replacement:

click on: http://www.espares.co.uk/advice/washing-machines/a/7/1397/how-to-replace-the-door-seal-on-a-washing-mac.html


Tips to know while changing the door seal:
http://www.espares.co.uk/advice/washing-machines/a/7/38/replacing-a-washing-machine-door-seal.html

Please look into a visual demo for changing the door seal:

http://www.espares.co.uk/advice/washing-machines/a/7/1397/how-to-replace-the-door-seal-on-a-washing-mac.html

Please find some tips to change the door seal with a demo on a machine:

http://www.espares.co.uk/advice/washing-machines/a/7/1397/how-to-replace-the-door-seal-on-a-washing-mac.html
Tips to replacing the door seal;
http://www.espares.co.uk/advice/washing-machines/a/7/38/replacing-a-washing-machine-door-seal.html

This video will show you how to change a door seal on this Bosch front loader washing machine

1) remove the tension ring under the rim of the seal at the front
2) flip the whole seal into the drum so that you can get at the inside of the seal
3) remove the tension ring hold the seal to the outer tub
4) reverse of the process to put in the new seal

Its as simple as that.

switch off your power to the washer pull-out so you can undo the screws for the lid take the lid off now open your door there should a clamp surrounding your door seal you may not be able to see it but it is there undo it now look inside your washer to the inside at the back part of your door seal there will be a clamp this should either be a spring clamp or a screw clamp undo this clamp door seal with pull off now reverse the order of how you took your door seal out problem solved it is not too hard to do once you have done it you will find any washer door seal easy to replace trust me done thousands m8