Radio, aftermarket radio kit(used to mount the radio), and an aftermarket wire plug. This plugs into the radio and your existing harness. Otherwise you have to cut and splice wires. I use a volt /ohm meter to cut and splice.

Apr 03, 2016 | Dodge Cars & Trucks

1 Answer

How to install axxess gmos 4 with aftermarket radio

Make sure you have connected the remote amp wire. This should be blue/white on the radio and connected to the blue/white on the GMOS-4.

Jul 03, 2014 | 2005 Chevrolet Avalanche

2 Answers

04 gmc yukon. Installed aftermarket radio. Installed a interface and no sound from speakers

It can be issue with Faulty radio AMP or the problem is with loose radio speaker wires.
There is a test procedure,you can do.Click the link below to follow the test procedure.
---------------

No sound from speakers on 04 gmc yukon

http://repairhelpcenter.blogspot.com/2012/10/no-sound-from-speakers-on-04-gmc-yukon.html
---------
these will help.
Thanks.

Oct 13, 2012 | Cars & Trucks

1 Answer

What is aswc harness in the gmos-lan-02 harness

Axxess ASWC Steering wheel control
ASWC = Axxess Steering Wheel Control, it's the additional wire harness you need in case you have controls for your radio / sound system on the steering wheel.

Apr 10, 2012 | GM Carts Axxess Gmos-lan-02 Gm Factory...

1 Answer

I need Only color coding for wiring diagram for cdx-gt550

If you are planning to install your radio, I recommend you purchase a wiring harness specific for your vehicle. All aftermarket radios are standardized in wiring colors. The harness will have the diagram to hook your radio to the harness. The problem with hardwiring a radio is the wiring colors don't match, and hooking it up wrong could fry your entire electrical system. You can find a harness at www.crutchfield.com Hope this helps.

Aug 23, 2011 | Car Audio & Video

1 Answer

Just changed radio on my 01 Yukon XL and now the speedometer doesn't work

Double check your wiring on the radio. The factory radio has a wire that comes from the vehicle speed sensor. When you speed up, the radio gets louder. When you slow down the radio gets quieter. That wire may go into the radio and then to the speedo depending on how the vehicle is wired. You may have to connect that wire to another (check wiring diagram). Another thought is that you accidentally hooked that wire up to something wrong and it blew a fuse. Good luck

Feb 11, 2010 | 2001 GMC Yukon XL

1 Answer

2000 Grand prix bose radio left front channel not working

check for loose wires at all harnesses and at the speaker also make sure all wires are coverd and not split or melted off

Jun 10, 2009 | Bose Axxess GMOS-LAN-05 LAN OnStar...

1 Answer

Instrument panel guages quit. Getting 'No Bus' error in odometer.

That wire needs to be hooked to the factory radio , part of the PCI bus - serial data communication network . I know on GM vehicles if the radio isn't hooked to the bus the vehicle will not start an run . Don't know if Dodge vehicles are that complex . http://www.dodgeintrepid.net/31-car-audio-video/58412-why-pci-bus-connection-radio.html http://www.carsondemand.com/IDLdocuments/Learning%20Guide/4450-t9r0k5io6vxazm80x5ire9zj4.pdf

You mite call a aftermarket installer an ask or the dodge dealer

Feb 28, 2017 | 2005 Dodge Ram 1500

1 Answer