Question about Kodak EasyShare DX6490 Digital Camera

Open Question

WHEN I HAVE PUT IN A FULLY CHARGED BATTERY .. I STILL CAN'T GET MY CAMERA TO POWER UP

Posted by flashmajik on

Ad

4 Related Answers

Anonymous

  • 3 Answers

SOURCE: Camera turns on and off repeatedly. Battery is

I think the problem may be in the camera software. I reset the timer for auto shutoff from 5 mins to 10 min, This seems to have solved the problem, but it will take a longer time to be sure. I would suggest everyone with the problem try this and post the results. A easy fix if it works long term.

Posted on May 12, 2009

Ad

SOURCE: My battery is fully charged, camera goes on and shuts off.

this generally happens if you have dropped it. when the message comes. try tapping the camera. if it works then you are lucky. if not then you have to change the lens array. it costs about 60$

Posted on Jul 15, 2009

Ad
lock123

Andrea Lock

  • 6831 Answers

SOURCE: I have my 3rd kodak easy share camera. The last 2

Hello

The problem is that the lens has become stuck in the barrel after dropping it. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

Hope the advise is useful.

Regards
Andrea

Posted on Aug 22, 2010

lock123

Andrea Lock

  • 6831 Answers

SOURCE: kodak easyshare ls743. lens wont retract. camera error #E45 shows on screen. battery is fully charged.

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea

Posted on Dec 14, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon Camera will not power up


Have you checked camera battery with voltage tester to see if it is charged fully and if not charge battery or put new battery in. Rich

Dec 24, 2012 | Canon EOS 400D / Rebel XTi Digital Camera

2 Answers

I have a brand new Nikon D3100. The battery was fully charged and placed in the camera. I took about 4 photos, and then turned the camera off. When I turned it back on the battery wasn't working to...


The solution to your problem is simple, Kathrynbax.


The battery never comes in fully charged. It's always charged only so you may be able to check if your camera is working. I suggest, you take out your battery and put it to charge for exactly 90 minutes as the manual says. Then I'm sure you won't face any such problems.


Hope this solves your problem.

Good day!

Rebel

Sep 17, 2011 | Nikon D3100 Digital Camera

2 Answers

No power - fully charged battery


How about cleaning the battery contacts in the camera first with a pencil eraser and then, with a cotton swab lightly dampened with rubbing alcohol.

Aug 02, 2010 | Canon Rebel XT / EOS 350D Digital Camera

1 Answer

Canon sd1000 camera won't turn on. battery is fully charged.


Hi,
Make sure or Check out following thing :-
  • Direction of your battery might be wrong, Check out and put it again.
  • Clean your battery terminal with soft cloth. (Might be it will filled with dirt or dust )
  • Check whether Memory Card/Battery Cover is properly closed.
  • Load new or fully charged battery.
  • Turn ON the camera, again firmly.
Else, Your device need service (repair)
Rating the solution is highly appreciated....Good Luck

Mar 05, 2010 | Canon PowerShot SD1000 Digital Camera

2 Answers

Its charged. i turn it on and it chuts right back


1. Make sure you will install a new or fully charged battery/batteries into your camera. 2. Clean the battery contacts. a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth. b. Reinstall the battery/batteries into your camera. Please make sure that you are installing a fresh/ fully charged battery c. Without the memory card, turn your camera on. 4. Please test with the a different battery If you do not have access to another battery Try these steps instead: Please take the battery out of the camera. b. Insert the charger into the unit from the main socket and turn the camera on. If the camera works you will need to replace the battery. If you camera doesn?t switch on you will need to order a No power repair or a new cable. In order to organise your repair or Trade up please Contact KODAK: http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

Dec 14, 2009 | Kodak EASYSHARE M1063 Digital Camera

1 Answer

Samsung camera saying low battery when batteries fully charged


well there is a problem of power supply in your camera or some kind of short circut u need physical assistance.

Jul 25, 2009 | Cameras

1 Answer

Battery is fully charged but camera will not power up


Check you manual .. is there a 'back up' battery (coin cell ??) .. if not then the battery is dead (rechargeable batteries do not last for ever) .. try a brand new battery

Oct 22, 2007 | Canon PowerShot G1 Digital Camera

1 Answer

After one frame battery icon flashes ( battery is full charged)


The problem is with the electric contacts between the battery and the camera. You can try cleaning them with a clean pencil eraser. Make sure you don't leave any eraser debris in the battery compartment. It is best to do this while holding the camera so that the battery compartment door is "down" so that any eraser debris will fall out of the door onto the table rather than fall into the compartment.

Oct 13, 2007 | Canon EOS-1D Mark II Digital Camera

1 Answer

DSC-T7 Power Problems


The only and the only solution is to get the replacement as this seems to be a defect in the camera and you should get it change immediately.

Sep 12, 2005 | Sony DSC-T7 Digital Camera

Not finding what you are looking for?
Kodak EasyShare DX6490 Digital Camera Logo

Related Topics:

44 views

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

Cindy Wells

Level 3 Expert

6259 Answers

Brad Brown

Level 3 Expert

18666 Answers

Steven Wander
Steven Wander

Level 3 Expert

595 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...