Question about Canon PIXMA iP2000 InkJet Printer

1 Answer

My Canon PIXMA iP2000 photo printer Waste Ink Absorber

My Canon PIXMA iP2000 photo printer reports that The waste ink absorber is full. Please how do I clean the waste ink absorber to enable my printer to work properly?

Posted by Anonymous on

Ad

1 Answer

Clive

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,345 Answers

Hi there try see if this will work

Reset ip2000
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..


Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Posted on Feb 13, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Waste ink absorber is. full. How do I empty it?


The waste ink absorber can sometimes be removed and cleaned out and put back into place. Although it is not always easy to get at. Usually once this happens it is time for a new printer. You can also contact Canon and see if they have a replacement part for this.

May 28, 2010 | Canon PIXMA iP2000 InkJet Printer

1 Answer

Printer shows warning


plz check the website http://www.fixyourownprinter.com/forums/inkjet/50418#1

Nov 18, 2009 | Canon PIXMA iP2000 InkJet Printer

2 Answers

Ink waste absorber is full. Canon IP2000. How do I repair it?


Well, at some point you will need to either replace or wash the absorber pads in the printer - but you can reset the warning as follows:

1) Turn the printer off
2) Press and hold the <resume>button
3) Press and hold the <power> button
4) While holding down <power> release <resume>
5) With the power button still held down, press <resume> twice more
6) Release the power button
7) Press and release the <resume> button 4 times
8) Press and release the <power> button twice

At this point, the printer should come back online with the waste ink warning reset

Personally, I would only do this once before actually changing the ink absorber pad...

Aug 31, 2009 | Canon PIXMA iP2000 InkJet Printer

1 Answer

How will i clean the ink waste absorber and reset it


use this link click here
this wil help you in cleaning the waste ink

you can also take halp of the following link

Jul 27, 2009 | Canon PIXMA iP2000 InkJet Printer

2 Answers

My printer canon pixma ip2000 wont print there is a message on the monitor saying that my ink waste absorber is full


follow the link
http://www.wikihow.com/Clean-the-Canon-Pixma-IP1000-Printer-Waste-Ink-Absorber

Jul 27, 2009 | Canon Office Equipment & Supplies

1 Answer

The waste absorber is full


Call Canon at 732-521-7230 and they will sell you a new ink absorber pad. You will need the reset code for your model printer. Find this by searching for canon used ink tank. One of the results should match your machine. You can also take out the pad(It can be messy so wear gloves), wash with water hose, let it dry completely, and reinstall it in the printer.

Jun 10, 2009 | Canon PIXMA iP2000 InkJet Printer

1 Answer

WASTE INK ABSORBER IS FULL FOR CANON PIXMA iP2000


The machine needs to be taken in for the waste ink absorber to be replaced

Oct 03, 2008 | Canon PIXMA iP2000 InkJet Printer

4 Answers

Canon iP2000 Waste Ink Absorber - where is it for washing and replacing?


I found it under my ink cartridges in my Canon iP2000 printer. Trying to losten it for cleaning, it came out in my hand, I washed it and replaced it with a tiny amount of glue. After resetting the program, it is working again.

Feb 11, 2008 | Canon PIXMA iP2000 InkJet Printer

1 Answer

Waste ink absorber


hi i am a certiffied Canon repair tech for this model. this is true this will reset the error but doing so without replacing the waste asorber pad in the bottom of the machine will cause your machine to backup waste ink into the the printing area of the machine and will start smuging ink on the page. the waste absorber is fairly cheap but the labor varies from shop to shop. there are independent Canon repair shops throughout the world. you can call 1-800-ok- canon or look on the canon website. hope this help to clairify.

Dec 22, 2007 | Canon PIXMA iP2000 InkJet Printer

Not finding what you are looking for?
Canon PIXMA iP2000 InkJet Printer Logo

259 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2325 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Cindy Wells

Level 3 Expert

6222 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...