Samsung DVD-V3500 Remote control code

How To Program A Samsung Remote To A DVD Player ' Codes For ...

codesforuniversalremotes.com/how-to-program-a-samsung-remote-to-a-dvd-player/

To program your Samsung TV universal remote control to your DVD follow these easy steps. ... component button (DVD) before you can use it to control your DVD. ... Samsung remote controls may not operate DVD players for all manufacturers

If your remote won't work at all, then you'll need to get a new remote from Samsung to control all functions. If however, everything works on the remote but the volume, keep the original for all other functions and just use a cheap universal remote programmed to the Samsung code to control the volume. I had the same thing happen on a Sony THIB remote for a HT. I used a Scientific Atlanta to turn it on and off, as well as control the volume, but retained the original remote so I could get at all other functions. If you have to buy a new Samsung remote or if you buy one of those high-dollar universal remotes that program a zillion functions it will cost you big. Fair warning.

Remote code for HP BD-2000 Blu-ray player - AT&T Community

https://forums.att.com/.../Remote.../Remote-code...BD-2000.../467...

AT&TDec 2, 2012 - I have an HP BD-2000 Blu-ray player that I recently lost the remotecontrol for. I do not see HP as a manufacturer on the DVD list when I try.

Universal Remote Control Codes List - TV SAT DVR ...

removeandreplace.com/2013/11/10/universal-remote-control-codes-list/

Nov 10, 2013 - We compiled this universal remote programming code list to make it ..... Looking for a code for a orion vcr I have a 5 digit universal remote by rca -rcrn04gr and I ... remote control code (s) for a samsung blu ray dvd player bd-fm51 /ZA ... Please, could someone to give me the code for DENON AVR-X2000.

Programming the RCA RCRN04GR Universal Remote

voxrightnow.custhelp.com/.../programming-the-rca-rcrn04gr-universal-r...

Jul 28, 2010 - Program your Remote. To use this universal remote with your home entertainment system, first you need to program it to control your devices.

[PDF]Rcrn04gr - Universal Remote Control Codes

Hi

Codes for your universal remote for samsung DVD are

0037 0556 0587 0009 0217 0370 0264 0216 0072 0208

Thanx

Code depends on universal remote,there should be a manual attached when you buy a remote

here is a link to the codes you will need;
http://www.comcast.com/MediaLibrary/1/2/CM/VanityURL/documents/comcast_on_demand_remote_manual.pdf

hope this works for you
please give good rating
thanks

tom

I have a brand new one!!! I can list it on ebay very cheap. You can e-mail me at [email protected].

I lost my instructions to program my tv with the remote can you help me

Can I suggest maybe instead of trying to program your universal remote control, maybe a better solution is trying to buy the original replacement remote control for your Cyberhome DVD Player. I've been down this road before and eventually you'll be faced with not being able to find the solution and not left many other options. I went to http://www.everytvremote.com to buy a cheap replacement remote for my tv and got it within a week and didn't have to worry about programming the universal remote ever again!

I have a good Philips Universal the code is 1908 Press Code Search until red light comes on Press VCR/DVD light flashes Press 1908 Light goes off It should work.