Alpine 7863 how do you get to the sub comtrol with out the remote?

try this link http://caraudio.manualsonline.com/manuals/mfg/alpine_electronics/cda7965_cda7864_cda7863_cda7862.html

Try Ebay, they will have it at a pretty reasonable cost..

Thank you for posting this link

http://caraudio.manualsonline.com/mdownloads/f0c061ca-c58a-4438-a84c-66e7b73604a3.pdf

press & hold the eject button

press and hold clock button for atleast 3 seconds while the time is displayed until time blinks.rotate the mode knob until the hour is correct. press the mode button to adjust your minutes. when done press mode button again to set.

Doesn't have one! Cheaper Alpine unit

Connect the 2 gage to the battery thru at least s 50 amp fuse, then connect the capacitor in line before the amps. Then run the 2 gage to a connector/splitter block and run 4 gage leads to each amp. You also will need at least 4 gage ground leads from each amp to a body grounded bolt or screw. You need to run a quality set of speaker leads from the head unit to the amps. The speakers will need separate leads from the amp to each speaker.You will need to try some different combinations to get the sound and bass you want. You want to be able to fade from front to rear and control everything thru the head unit.
Use a hole saw to cut a 2 to 3 inch diameter hole in the side of the speaker box for a port to get a better punch from the sub.
Hope this helps some....

Beautiful country! For direct connection to your nearest Alpine Specialist Dealer in Australia, 1 300 765 760 (cost of a local call) Good Luck