Nikon D200 Digital Camera with 18-200mm Lens Logo

Related Topics:

Question about Nikon D200 Digital Camera with 18-200mm Lens

1 Answer

My Nikon D200 just started locking when I depressed the shutter. It gave me the R25 reading in the view finder. If I depress the ae focus lock it fires. What is going on? [email protected]

Posted by cmaclennan on

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 20 Answers

Check your Custom Setting Menu, a1-a10:AUTOFOCUS.

Press Menu, select the Custom Menu Setting (looks like a pencil).
Select "AUTOFOCUS" and move to right.

a1 AF-C Mode Priority. Set to "Focus"

a2 AF-S Mode Priority. Default is "Focus", change this to "Release". This will enable the camera to fire anytime you press the shutter, regardless of if it's in focus or not. Use this setting if your having problems locking up, especially using some different lenses.

Try these settings. They may work for you.

Posted on Jan 06, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Why are my photos blurry

I would think that you are not focusing your camera before fully depressing the shutter button Start by depressing your shutter button very lightly until you see the outline of a small square in the middle of the view finder . At that point you are in focus . Now fully depress the shutter button and take your picture . You must do this prior to taking each photo . Remember to just depress the shutter button about half way to focus your picture image , before pressing it fully . I hope this is of some help to you.
Apr 06, 2017 • Cameras
1helpful
1answer

I have turned camera on and set up to take a photo and the shutter release button will not press in to take the photo. I used the camera yesterday and it worked fine!

Turn the camera on and look into the view finder while you try to press the shutter button. Check the information in the view finder to see whether you are getting an error message. If you see an error message in the view finder, remove the lens cap and proceed to take a photograph but, instead of pressing the shutter button this time, press the button near the top of the camera on the back which says "AF/AE. If the camera takes the photo it means you have somehow initiated the auto focus/auto exposure lock which the camera will not override when attempting to take a photo using the shutter button. When you use the AF/AE button, you override this system. To remedy this issue, when you get the error message try pressing the shutter button again. Also, remove the lens to see if the shutter inside has frozen in the "locked" position. If you find this to be the case you will need to contact Nikon Customer Support. The link for Nikon Support is below. The numbers are half-way down the page.

http://support.nikonusa.com/app/answers/detail/a_id/238
3helpful
1answer

My Nikon D200 digital camera will not focus when I depress the shutter butteon half way and will not take picture when shutter is completely depressed. this all started after I downloaded my pictures to my...

Hard to pinpoint the exact problem...
What lens do you have attached? Does it have a switch for M/A and M (auto focus/manual focus)? If it does ensure the switch is in the M/A or Auto Focus position.

On the left side of the camera on the face there are 3 positions, C, S, and M. Ensure it is not on "M" for manual.

Do you have your camera setup to only allow the shutter to operate when it is in focus?
1helpful
1answer
1helpful
1answer

Err, R25 on display

The D200 uses a different way of changing the aperture than on that old lens. Set the switch to 22 and lock it with the little lock just above it. It always has to set like this. Now the D200 will stop complaining.
0helpful
1answer

I have a nikon d200, lately the shutter lags 1-2 seconds.

It is probably delaying while it autofocuses.  If it is like most Canon cameras, depressing the shutter half-way should allow you to focus without taking a picture, then when the moment is right, depress the shutter button fully to take the shot.  You will want to practice this a bit to get used to it.  Shooting in low-light it can take longer to find the focus, so it becomes more necessary to use this technique.
Hopefully that helps, but I am not a Nikon user.
1helpful
1answer

Auto focus does not work in the creative zone

Sounds like your custom functions have been changed to work this way. On the EOS 350 D it is Custom Function #04. To change it back to default you need navigate through Canon's menus. Here's how to get there: while in one of the creative zones go to your camera menu and navigate to the 5th tab on the right. Select “Custom Functions (C. Fn)” from this tab. This will open a submenu of numbered options. Select #04 and set it to 0: the default AF/AE lock on a half depress of the shutter. That should get your camera back to the expected auto focus with the shutter button.
Happy shooting :-)
0helpful
1answer

I have a Nikon D200 camera. It's now 2 years old and I'm having difficulty with the auto focus. The camera focuses but it comes in and out and I have to depress the shutter several times to get it clear....

the auto focus works on the basis of contrast. If you aim your chosen auto focus square at an item that fills that square with only one color or shade of color light a blank wall or a solid blue sky the camera can't focus because it is trying to compare the contrast in order to focus the camera. try to make sure that you choose an item with contrast to aim your auto focus square on like someones eye and part of their cheek so the camera can see somre contrast to evaluate then focus. Obviously you depress your shutter half way to activate the auto focus let the camera do its thing keeping the shutter half way depressed move your field of vision to where you want it then fully depress the shutter to take the picture. the camera relys on seeing some contrast within your autofocus square in order to auto focus
0helpful
1answer

N70 FE E error in LCD and view finder - lens locked properly

Yes, the error is due to your lens not being set to highest F number. Solution : set lens to the highest number ( f 16 or f 22 ) and lock it in ( on the lens ). Your camera will work find now.
0helpful
1answer

Will not auto focus

"... Autofocus Lock ("AF-L"). Pressing the AF-L (Autofocus Lock) button enables the Nikon F4 to lock the focus. Simultaneous lock of AF-L and AE-L is possible. "'FREEZE FOCUS" - is another great function in the F4. It allows automatic shutter release when subject enters a pre focused distance - available with Nikon MF-23 and/or the 250 exp. MF-24 Multi-Control Back. i.e. with the shutter button fully depressed, the shutter is automatically fired when a subject comes into a preset manually focused position. This function is recommended for sports races because the racing course is usually known beforehand. It also works well in wildlife remote control photography, scientific, forensic and other technical photography. ..."
Not finding what you are looking for?

623 views

Ask a Question

Usually answered in minutes!

Top Nikon Cameras Experts

Steve

Level 3 Expert

3290 Answers

Brad Brown

Level 3 Expert

19166 Answers

David Shaub

Level 3 Expert

2994 Answers

Are you a Nikon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...