I have an alpine cda-9813 and it quit playing cd's. it still plays the radio is there anything I can do? or anywhere I can send it to?

http://www.bing.com/shopping/alpine-cda-9813-radio-cd-mp3-player/specs/EC5C974D67E1C28D1119?q=alpine+CDA-9813&FORM=HURE

There is no Aux output on this system.

This link has wiring harness for sale

http://www.onlinecarstereo.com/CarAudio/p_13216_Alpine_CDA-9813.aspx

sure it will the face eject button should be either on the upper or lower left corner of the face.

You check the radio fuse in the fuse panel?The wire connections are right? Check the Owners Manual for other details or troubleshooting: ALPINE CDA-9813

Hope helps.

There is a very tiny dot located either on the actual face of the alpine head unit or on the front plate of the radio once the face has been removed. Once you find this dot(if on the actual face) you need to make sure unit has power turned on and witha tiny needle or pick you may push this reset buton in for about 2 seconds. The face will automaticaly fold down and the disk will eject itself. Once this is done do not place the same disk back into the unit. Hope this solves your problem

The Alpine cda-7842 was not intended to play burned cd's and Mp3's. I don't recemmend you play anything but store bought cd's. I belive that the laser can be damaged by playing Mp3's and they sometimes make weird noises because of the laser seeking erratically, due to the year that cda-7842 was manufactered.

hit the reset. check and double check all connections. if it keeps giving you problems call alpine tell them. they might just have you trade it for a new one.

i have that same problem. when i turn the volume up, it shuts off but comes back on right away. the only thing i can think of is i'm not running the constant power directly from the positive terminal on the battery (which is what is recommended). not sure if thats the solution but im gonna try and wire it right anyway...

i think the clock is on the disp button in the top left 

on your cd player hold down the f button for few sec. It will take you to the setup screen. You will then scroll till you see POW-IC make sure it says ON if it is OFF then only your subs will play and no door speakers.