Hello,
All my prints are coming out with horizontal lines across them every 2.5 cm. The lines aren't the white ones that would indicae the need for head cleaning. Nevertheless I have cleaned the heads and performed print head alignment but the problem persists. Any advice?
same problem epson stylus photo R 340
stu
Clogged nozzle, run the clean head then test page in this order at least 5 times in a row, you should see an improvement on each test page, sometimes you need to keep doing this clean/print until the nozzle becomes unclogged, if you don't see a difference in the 5-10 clean/test page then you need a new head
hope this helps
Thanks for your rating
Check if those lines matches the positions of the rollers inside the printer - you can see some of them by opening the cover
542 views
Usually answered in minutes!
×