Samsung DVD-P380 region mess-up

1) Turn on the player with no disc in the tray.
2) Open then close the tray, wait to see the No-Disc Message
in the top Left Corner.
3) Now press the REPEAT button on the remote, followed by a
five digit code. eg. 57538 if you have a region 2 player.
4) When it works a 2 (your current region) will appear in
the top left corner.
5) Press 9 to make it region less.
6) Press Eject to OPEN to open the disc tray.
7) Press Eject to CLOSE to close the disc tray.
8) Power the unit off
9) Now power the unit on again, it should now read all
regions of DVD/BD Disc.

Here is a list of all the region codes:

R1 - 29334
R2 - 57538
R3 - 56732
R4 - 76884
R5 - 53814

DVD region Free:
WITH THE REMOTE CONTROL OF YOUR BLUE RAY

1. Power ON. Make sure No disc is showed.
2. Press REPEAT button.
3. Press 7-6-8-8-4 (or your region code).
3. The current machines region code will display at the top left of the screen.
4. Press 9 to change to free region and turn off your player.

Patience. If the above code didnt work, try the below one by one..

1- 29334
2- 57538
3- 56732
4- 76884
5- 53814
6- 24462

Hi.

Try the following region hack procedures.
1. Turn on the player with no disk inside.
2. Wait for the no disc message.
3. Press REPEAT 57538.
4. The number 2 will display in the top left corner
5. Press 9 to select multiregion.
6. The Samsung BD-P4600 is now region free.

It works on most Samsung BD-P4600 .

1) Turn on the player with no disc in the tray
2) Press the Open/Close button to open the tray
3) Press the info button, the firmware version shows up (
4) After the version info disappears, close the tray again by pressing the Open/Close button
5) At this point, it will show "no disc" at the top. Press the Info button again, and this will disappear. If the "no disc" does not disappear then try again by using the REPEAT button 
6) Now type the code that applies for your region (R2 is 57538). A '2' will briefly show up at the top left corner
7) Now press 9, and 9 will show up in the top left corner
8) Power off the player, and turn it on again. You'll have a multi region player

I've found the following codes at the 1080P7 hack:
R1 - 29334
R2 - 57538
R3 - 56732
R4 - 76884
R5 - 53814
R6 - 24462
This worked on my dvd1080p9 R2 DVD player

Hello, Please get the code here : www.dvdoverseas.com/dvd.htm
www.regionfreedvd.net/

Regards, Jay__Iuj8n9

Not sure of this works on the very latest models but here it is :-

1) Press the POWER button on the remote to turn on the
machine (no disc in the tray).

2) Wait till the player has booted up and the Samsung logo
screen is displayed.

3) Press the OPEN/CLOSE button on the remote twice, to open
then close the disc tray.

4) As soon as you see "No-Disc" displayed in the top left
corner, press the REPEAT button followed by the 5 digit code
for your current region as listed below.

(Mine was 57538 for region 2)

Don't press the REPEAT button for too long, just smoothly
press REPEAT 5 7 5 3 8.

If it doesn't work straight away, keep trying, mine worked
on the first go.

5) If you're successful, your current region code will be
displayed in the top left corner of the screen.

6) Press '9' to make your player region free.

7) Turn the player off, then on again and test with a
different region disc, or if you don't have one to test
with, just repeat the hack and instead of your old region
code appearing in the top left corner of your screen, you
should see '9' if you've been successful.

The hack can be repeated to turn your machine back to it's
original settings or to a particular region if the disc is
sensative to region free machines.

Region Codes

R1 - 29334
R2 - 57538
R3 - 56732
R4 - 76884
R5 - 53814
R6 - 24462

One of these 2 should work.

1. Make sure that there is no disc in the tray and switch on the player.
2. Cold start the player, by holding down the PLAY and STOP buttons on the player.
3. You should see a set of language options. Release the PLAY and STOP buttons.
4. Select your language.
5. Press REPEAT (do not confuse this with the A-B button) then the following codes for the required region the player is already set to (region you bought the player in) :

Region 1 - 2, 9, 3, 3, 4
Region 2 - 3, 8, 7, 6, 7
("E series M105", M205 and M305 users try: 57538)
Region 3 - 5, 6, 7, 3, 2
Region 4 - 7, 6, 8, 8, 4
Region 5 - 5, 3, 8, 1, 4
Region 6 - 2, 4, 4, 6, 2

6. A code will appear, indicating the region setting of your player.
7. Press 0 for region-free, or 1 for region 1, 2 for region 2, etc.
8. Press OPEN/CLOSE on the Player to open the disc tray. You may need to push the tray shut rather than use the player button, in order for the region not to be changed to 4 (M203).
9. Press STANDBY (POWER) on the remote control to close the tray. Next time the player is turned on it will set to the region specified. If the player halts on the FBI Warnings, press Forward Search x2 or faster.
<DVD> ; press DVD button
<0><0><0><0><0> ; enter 5 times 0
<repeat> ; press repeat button (careful, not <repeat A-B>)
<5 digit code> ; see below, depends on region the player is currently set to
<0 for region free, 1-6 for other region> ; select new region
<open> ; open tray
<open> ; close tray
Now power off/on

5 digit code:
region 1 : 29334
region 2 : 37867
region 3 : 56732
region 4 : 76884
region 5 : 53814
region 6 : 24462

Note: reset player by powering down and simultaneously pressing <power> + <play> until display shows 'reset'.