Wont turn on

You can download driver for your camera from Aiptek support here :

http://www.aiptek.com/drivers.htm

But I can't find DV 3500 though, but there are DV 5300 and DV drivers. You can choose proper driver for your device.

Hope this help and if helpful RATE please.

The output from most computer USB sockets is insufficient to charge any camera, but replacement wall plugs are easily obtained.

IS-Dv does not have internal battery charger, the battery is charged externally using NP60 Li-Ion battery charger ,You can get the battery charger from the manufacturer (Aiptek:)

Try taking the memory card out the turning it on and if it does just put the memory card back in and it should work.

All right if you have the same problem that i had what you need to do is take the battery out the take the memory card out the put the battery back in then try and turn it on if it works then put the memory card back in and it should be fixed

A common problem is battery drain. This is caused by a leaky component on the circuit board. Replacing the board is the only fix.

Aiptek website has ALL of the drivers for their products for downloading.

i have the same problem

Try to format the card first

Maybe the rechargeable batteries aren't providing enough power. I'm assuming the batteries are recently, fully charged. Rechargeable batteries can lose their charge over time even if they're not being used.