Got a Ms-6368 ver 2.1 hangs or freezes on boot up

If this is in a desktop computer you will unscrew 4 screws on the back of the tower, the screws with be aligned in a rectangular fashion with one off kilter. Then follow all the plug wires coming out of the power supply and unplug them all. All the plugs are keyed and only fit into the right slots the right way. Buy a new PSU from online, bes tbuy or office depot and make sure it has enough of the right plugs. Make note of if your motherboard uses a 4 pin square plug, a 20 or 24 pin motherboard, and how many mux (4 pin rectangle with 2 angled edges) or how man sata has a L shaped connector end you need and get a power supply with all of those connectors.

Cut and paste this link...select the DOWNLOAD tab, click on MANUAL.
Choose the 2.0 version of the manual. It supports 2.X versions of the motherboard. Page 2-14 has the infomration you need.


http://www.msi.com/product/mb/MS-6368.html#/?div=Manual

You can set the boot priority from the bios. Restart your computer and hold down the delete key as it's starting up to enter the bios set up screen. Once you have changed the boot device priority done press 'escape' and then 'save&exit'.

check ram and video first

Manuals are present on the MSI Web Site: http://www.msi.com/index.php?func=searchresult&keywords=ms-6330

May need to Fish Around a bit... not sure which one is yours... didnt see a ver 2.1. May be able to match the Pic or Boot the MB to see the details.

first of all, you need to another 512Mb of memoires. it will run better. second, go to BIOS and search for boot order, chaneg the the boot order to Hard driver first.

The manual should be available from this link.

Good luck, post your results here.

You have to go into the CMOS to turn off the motherboard Video

Well, since I received a solution from MAXTRIXKHAN, I just wanted to check back with NCIX.com, and here is a recap of what I did, and what they told me...

After a few tries, I had to contact LG Customer service.
I tried to burn to...

-Maxell CD-R, no problems,
-TDK DVD-RW, no problems,
-Verbatim DVD+R, Computer hangs.

Well, I bought this DVD-Writer to replace my old GSA-4167B, and LG customer service told me that this DVD-Writer does not support the Verbatim DVDs.

So, if you have plenty of Verbatim DVDs, you should forget about this writer.

Supported DVDs...
Maxell, Sony, TDK

Will have to send it back to NCIX

So beware

tiyo73

Hi Let's start from square one. If you are using PS/2 keyboard, is it one that is working? Please double check this. If it is, then maybe your motherboard PS/2 keyboard port is faulty. In this case, try using a USB keyboard to see if you get a response from the keyboard. Also, for the 'no floppy found' problem, have you verified that this floppy drive is working? If so, is the floppy cable plugged in correctly? The twisted part of the cable should be plugged into the floppy and the other end into the motherboard. Let me know if this works. Good Luck