Hello i have a hyundai tv plasma HPT 428 1H 42" IV LOST THE PLUG THE MAIN PLUG ITS LIKE A THREE PIN THAT GOS INTO THE TV WITH THE PLUG THAT GOS INTO THE WALL. I NEED TO BUY ONE IN LONDON ASAP HELP
Try a computer/electronics store. Ask for a power cable for an lcd monitor. It should be the cable you need.
SOURCE: Vertical Black line
The plasma display screen is made of a matrix of elements connected to
cables along the side and top. On your unit, some of these many, tiny
connections are making contact intermittantly thus losing the elements
in that area. These contacts are held in place with just pressure and
if that is disturbed, you lose that line of elements. Try squeezing the
cabinet of the TV on the outside at the top in the area of the loss and
see if that makes a difference. May have to go inside and see if the
contact assembly is disturbed or warped or something.
Hope ya fix it!
SOURCE: Hyundai Hpt 4240 Plasma Screen tuning instructions
Try the Hyundai web site, or call their service rep.
Jerry G.
SOURCE: Hyundai 42" Plasma TV
hyundai hpt2450 tv switches on with standby button on remote or at tv and picture and sound ok but the little "tv" symbol at bottom of screen remains on locked in tv mode.It is not possible to change channels alter volume or change input source! The set does not respond to the remote or on board controls.It cannot be switched back to stanby with either the remote or the sets own standby button. It has to be switched off the the main on/off switch.
Any suggestions?
SOURCE: pink vertical line down my 42 inch digital plasma
I do believe the Panel is bad and needs to be replaced. Check with the manfacture to confirm this.
145 views
Usually answered in minutes!
×