Disney P1310atv Remote broken and need to use video input

You should have a remote control to select its inputs. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/
Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.

I used the vibe 4 in one but with Emerson codes1008

since most of the disney TVs are manufactured by memorex company ..... from your universal remote control's manual check the codes for memorex brand & try it .... if you don't have manual for your universal remote then from this link http://www.remotecentral.com/features/remotes.htm identify your universal remote & in that check codes for memorex brand & try it .... while searching answer for your question i have found that many people have same problem that is code for universal remote ..... but they never got right answer ......... & also neither same original remote control nor equivalent remote control is available (spare ) ...... so in case if you don't get right code then consider selling of this TV & buying new tv ...........

Try website like Remotes.com to buy the tv original remote.Little more exspensive than those universal remotes.Don't tries this tv with those universal remotes,it will not work or have universal codes for this tv.This tv was a specially manifacture for the Disney Corporation only for briefly period of time only by an small un known electronic Corporation for the late 90 Aminations cartoons movies fads only.

there may be a problem with the tvs remote sensor. most universal remotes you dont even have to enter any codes you just have to follow the same steps to enter the code but instead of entering a code all you have to do is press the channel up button after following all other steps, just keep pressing up until it turns the channel on the tv then press enter or similar button after it changes the channel and this should lock in the code without entering a specific code.And if all other remotes only half the buttons work on if it happens with every universal remotes then it probably a problem with the remote sensor or the tv . Good luck too ya!!!

Try Remotes.com to buy the original remote,will never worries about codes again.This tv was manufacturer by some small company for Disney corporation,that why very hard to get the universal codes to when the tv is old.

no you require the remote or a universal remote or sometimes a cable remote that has been programmed to work the volume on the tv set will have an input button .

Look on the back of the TV or in the back of the manual and you'll see the name of the company that manufactured and/or distributed the TV, or you may find a telephone number listed in the manual. You must contact the manufacturer to find a replacement remote for that TV. Universal remotes don't work because that set is actually made by a small company that doesn't communicate with universal remote makers.

I hope I've provided you useful assistance and that this information allows you to make an informed decision as to how to proceed from here. Please be sure to vote on my response. I hope I've earned a good rating from you today.

Please post a comment if you need additional assistance so that I can help you further.

My disney princess tv model P1310ATV uses code 759 with Echostar 6.2 and 6.3 remotes. This code is listed in the echostar manuals as a code for Hisense manufactured TV's.

I too own the Disney Pirates of the Carribean television. We have it setup in my boys' room so they can only watch DVD's, there is no cable connected to it. However, everytime we turn it on, we have to use the remote to change the input to dvd. The large Mickey button on the remote fell out and my daughter lost it. Without that button, you can't change the input at all. Therefore we have a perfectly functioning television that we can't use.

I emailed Disney and they redirected me to the actual manufacturer of the TV, Starlight Griffin. The phone number is 866-387-1902. I called and within 5 minutes, I was told that I would recieve my new remote within 10 days at NO COST TO ME!!

I went crazy for days trying to figure this out so I had to share that info with all of you immidiately! Good Luck!!