I have a PDT3100. But I need to connect it to another PC, as the old one is broken. Where can i get the communications files from?

You'll need the manual for that. Here's a link to Symbol's site where you can select the documentation you need. You might need to cut and paste the address into your browser's address bar. Good Luck.
http://support.symbol.com/support/browse.do?WidgetName=BROWSE_PRODUCT&TaxoName=SG_SupportGoals&BROWSE_PRODUCT.isProductTaxonomy=true&BROWSE_PRODUCT.NodeId=SG_PDT3100_1_2&BROWSE_PRODUCT.thisPageUrl=%2Fproduct%2Fproducts.do&id=m4&BROWSE_PRODUCT.TaxoName=SG_SupportGoals&NodeType=leaf&NodeName=PDT3100&document=DT_PRODUCTMANUALS_1_1&BROWSE_PRODUCT.NodeType=leaf&NodeId=SG_PDT3100_1_2&kwidget02.docType=DT_PRODUCTMANUALS_1_1&AppContext=AC_ProductPage&param_document=sp

What do you do if you no longer have access to a Psion, but need to access some data from an old Psion backup on your PC? Native Psion files can't be read on a PC, but fortunately, there are some solutions:

• Use the PsiWin PC connectivity suite to convert the Psion-format files to a format that can be read on the PC.
• Download and install the Psion ER5 emulator - this gives you a Psion machine on your PC, and will allow you to access your old data on a PC - See our emulator setup page. From the emulator, you may be able to print or export your data to a text file, or use a third -party Psion converter
• Consider borrowing or buying an old Psion machine, loading the files onto the Psion, then printing the documents or data as a text file
• Find another friendly Psion user that may be able to convert the file into a format that can be read by a PC for you. If you don't know of another user, try asking for help in our Psion forum

also
Data conversion for the Psion can be quite complicated, due to the file formats used by Psion / Symbian. You should find that the PsiWin program supplied on CD with your Psion machine can help you with most of your conversion needs. If your PC is connected to your Psion, dragging files from "My Psion" to the PC should prompt you to convert to a PC format, otherwise you can convert files that are stored on the PC, using the Psion File Converter. This program is installed with PsiWin and is located in c:\program files\Psion\PsiWin - the application filename is Cpycnv.exe
For more help on file conversion, see our dedicated conversion page.
Agenda and Contacts databases: Note that these can't be converted using the Psion File Converter - PsiWin supports synchronisation of these files, but not direct conversion. See our suggestions in our Backup FAQ. The most common solution is to load up the files in the Psion Emulator, and either use Print to save the data as a plain text file, or use a Psion-based converter, as detailed on our Conversion page

Get the Internal Power Unit checked as i can see its not been able to communicate each other.

Hello,

we have been programming these old dos units for over thirty years, you can contact me at 800.933.2839 x251

Thank you, Kim Ganoe

if you put the old battery and it works properly then the new battery you bought is not the exact battery for your mp3.also i advice you to reformat your mp3

No there is no special methods.

Hola dlujan. Usted está utilizando tft3000 en DOS, ¿correcto? Compruebe y asegúrese de que su PDT3100 está en el puerto COM1. Luego de verificación para asegurar que el programa DOS está tratando de recibir los datos de COM1. Si eso no funciona, entonces usted querrá tratar de volver a instalar su software en tanto su PDT3100 y su PC. Espero que esto ayude. Buena suerte!

Hi there
First I need to know if you got the software that is on existing pdt3100 on a computer? once I know the answer to this I can start to tell you how install software on pdt3100's

mant thanks
Robert

I would like to suggest since you are approaching to GUI enviroment you need to develop system build by visual basic using MSCOMM control by sending and receiving data between PDT3100 and PC.

Please try to visit www.planetsourcecode.com for best VB tutorials about how to use MSCOM1 or hire/chat me if you need my further assistance.

Good luck,

Philip

check the cradle or cpu