Sony KP-53XBR45 rear projection TV: Coax input Selector Antena part on rear has the AUX input 'male' connector but the TV/Cable 'male' connection end is missing. Is there a way to use the AUX or any other secondary connection method to send cable signal to TV so TV can be watched (i.e. VCR/DVD with channel changing capabilities)? Or, do we have to replace the (1-251-321-12 part # Selector Antenna?

You can replace the connector or if you have a cable box with audio and video outputs on it---connect them into one of the sets of jacks on the back of the set--switch to that input and change channels with the box----you can also do the same thing with a VCR--hook the cable into it and use its video and audio output jacks to connect to the video and audio input on the back of the TV.

In this case (the VCR does not have to work except as a tuner) you will go to whatever input you connect to and use the VCR to change channels.

These are a little less easy to use but costs you nothing---I am here to help, if you have any questions or need help let me know.


SD TECH