Code I want to program all my devices to one remote, does the cyberhome 1600 dvd recorder have a 3 digit code I can use to program it to my bell hd reciever remote thanks

I have an extra 1600 remote.
I Frankensteined 2 dvrs together to make a working unit,
and ended up with an extra remote.

My unit finallt over heated and died, so let me know where to send the remote. You can send me a cd of music or starbucks tiny little gift card for my trouble if you so desire.

[email protected]

contact cyberhome to find out who actually makes the unit (e.g. western digital, scientific atlanta). then use the codes for the actual manufacturer on your universal remote. that should do the trick.

I have a GE Universal remote and the codes for Cyberhome are 0393,0985,0939. Try all of them.

20839 is the DirecTV & Access HD universal remote code for Mintek, Shinsonic, & US Logic. None of which brands are listed in my Yamaha RAV283 remote code list (uses 4-digit codes).

20717 is also listed for Mintek by DirecTV. Other brands with the same code on DirecTV remote are: Apex, Blaupunkt, GE, Greenhill, Initial, KLH, Nesa, & RCA.

Of those brands, only Apex & RCA are listed in my Yamaha remote's list. I tried all of the codes for those 2 brands under types DVD, DVD Recorder, DVD/VCR, & TV/DVD. None worked. It appears to me that only those 3 brands for 20839 share the same remote code settings. If your remote doesn't support any of those 3, I doubt you will be able to use that particular remote with the Mintek DVD-1600.

I hope my research helps someone with this, as it was unfruitful for myself. Good Luck!

http://www.retrevo.com/s/CyberHome+DVR+1600MU?rt=pd

that link is for the dvr...

the universal remote codes can be found on the website for the manufacturer of the remote control

codes for this dvr are

0714
0816

they don't work for my new remote but everywhere says they are right

Don't know if this is what your looking for but give it a try.





How to convert your CyberHome CH-DVR 1600
into a Region Free DVD Player
There are two versions of the Cyberhome DVR 1600 which require different methods of changing the Region Coding
CH-DVR 1600 MU

1. Power Up the unit with NO Disc in the tray.
2. Press the Setup button on your remote control
3. Press the 1 button on your remote control
4. Press the 6 button on your remote control
5. Press the 9 button on your remote control
6. Press the 5 button on your remote control
7. Press the 1 button on your remote control
8. Press the 8 button on your remote control
9. Select the region code with the Number buttons or the Navigation Buttons on your remote control. 0 (Zero) for Multiregion.
10. Exit the menu
11. Press the Power Off button on your remote control
12. Press the Power On button on your remote control

CH-DVR 1600 ZU

1. Power Up the unit with NO Disc in the tray.
2. Press the Setup button on your remote control
3. Press the Red Record button on your remote control
4. Press the 8 button on your remote control
5. Press the 1 button on your remote control
6. Press the 0 button on your remote control
7. Press the 5 button on your remote control
8. Press the Red Record button on your remote control
9. Select the region code with the Number buttons or the Navigation Buttons on your remote control. 0 (Zero) for Multiregion.
10. Press the Setup button on your remote control

codes are
0714
0816

I have a cyberhome 1600 dvd recorder and I need a code to program it to my bell remote but can not find any codes for the cybehome. can someone help with the codes