My ML 1610 Laser printer was working just fine a few minutes ago but it suddenly stopped printing and now the lights are blinking. It seems to be in this order 5 red 1 green 9 red 1 green 7 red 1 green then both then the cycle restarts over again any help?

It probably has a jam somewhere. Open each flap, remove the toner cartridge and check the paper path is clear.

TRY IN WINDOW XP

Download it from here:
http://www.samsung.com/il/consumer/print-solutions/printer/mono-laser/ML-1610/XSS/index.idx?pagetype=prd_detail&tab=support

The ML 1610 is a monochromatic laser printer (only prints black). Perhaps you have a software conflict for converting color files to greyscale when you use the printer. Try converting first to greyscale or print files that are only black. If the problem persists try to update your samsung driver software.

dear,
pl swithch of your printer and remove printer cartridge from printer. and open rear side of door of printer and remove your page gently

after remove page see carefully paper is jamed or not.

after swithch on.

check with print.

Check if the Toner is all the way in, you should hear a click, if not then something wrong or you installed it incorrectly.

i had that issue before, i didn't push it all the way in. and it whirrs but doesn't print.

Hello Gays , I am here again , you can open this like and download easily the driver for Samsung ML-1610 .Let me know if there is problem with it ..and Plz rate me ..

hello sir first u install dos base drivers from your printer cd -see below
go control panel printers and faxes select dos base defalt print ok by if any problem [email protected]

I want download samsung ML 1610 Drivers

I need the driver for the samsung printer 1710