I dont have a disk for my kyocera fs-920 , is there any other way to install it

Install software driver again..

http://www.nodevice.com/driver/FS-920/get35504.html

hi,

please visit the site
I have printed both from the CLI and the GUI; no difference. I thought maybe the paper ... http://www.openprinting.org/printer/Kyocera/Kyocera-FS-920 .... Also it seems the CD supplied drivers won't solve your problem. .... And NO WD-40 on plastics, better take silicone spray in a very light dose. ...
forums.scotsnewsletter.com > ... > Main > Bruno's All Things Linux - Cache

Click this link for more help:-- http://schematicsdiagram.blogspot.com/2011/05/red-flashing-light-on-kyocera-fs-920.html ------------- Thanks.

Kyocera and Copystar models are the same just replace KM with CS.

The following instructions should help you. TO download the current driver use this link to th emanufacture website; http://usa.kyoceramita.com/americas/jsp/Kyocera/resource_details.jsp?rid=18657.

Kyocera Printer Drivers and Mac OS® X 10.5 Leopard FAQ:
Is the installation for Mac OS X 10.5 the same as for Mac OS X 10.4 and earlier? Mac OS X 10.5 introduced a new printing architecture that requires changes to the installer and installation process. For this reason, Mac OS X 10.5 requires a new printer driver installer.

I cannot see my Kyocera AppleTalk® printer. How can I make it visible to OS X 10.5? AppleTalk is disabled by default in Mac OS X 10.5. Enable AppleTalk to discover your Kyocera printer.If you use the Kyocera installer, a message will appear, asking you to enable AppleTalk. Click Yes to continue the installation.

I cannot find Printer Setup Utility on Mac OS X 10.5. Is it still supported? Apple has removed Printer Setup Utility from Mac OS X 10.5. To install a printer, open System Preferences and click Print & Fax.

When I manually install a printer, multiple PPD files are listed for the same Kyocera model. Which should I choose? When manually installing a printer or changing a PPD for a installed printer, both Linux and Mac OS X PPDs are listed for some older Kyocera models due to a change in PPD handling in Mac OS X 10.5. Linux PPDs can be identified by the word Gutenprint in the PPD filenames.

Supported Multifunction Printers: KM-1650, KM-1815, KM-1820, KM-2050 ,KM-2530 ,KM-2550, KM-3035, KM-3050, KM-3530, KM-4030, KM-4035, KM-4050, KM-4530, KM-5035, KM-5050, KM-5530, KM-6030, KM-6330, KM-7530, KM-8030, KM-C830, KM-C830D, KM-C850, KM-C850D, KM-C2520, KMC2525E, KM-C2630, KM-C3225, KM-C3225E, KM-C3232, KM-C3232E, KM-C4008, KM-C4035E, CS-1650, CS-1815, CS-1820, CS-2050,CS-C2525E, CS-2550, CS-6030, or newer. Supported Printers: FS-820, FS-920, FS-1018MFP, FS-1020D, FS-1030, FS-1100, FS-1118MFP, FS-1300D, FS-1800, FS-1800+, FS-1900, FS-1920, FS-3800, FS-3820N, FS-3830N, FS-6020, FS-6026, FS-9100DN, FS-9120DN, FS-9500DN, FS-9520DN, FS-C5016N, FS-C5020N, FS-C5030N, FS-C8008N, FS-C8026N, FS-C8100DN, or newer.

I hope this is helpful,
Shawn

Hi,

You can download the required installation drivers and software from manufacturer's site by clicking this link

Hope this solves your problem. Thanks.

try this tutorial or this one and keep one thing in mind there is a generic print driver that mac can install this often works just as good as the one from the manufacturer

I’m happy to assist further over the phone at https://www.6ya.com/expert/norman_d2fa496dce30c65d

Your more than likely out of ink.

the driver for fs920 for vista can be found on the kyocera web site
www.kyocera.com

how do it lits? flashes or permanent? and kindly indicate if its attention indicator or ready indicator...
cause in every flash and lits of that indicators have meaning...