Question about Lexmark X4270 All-In-One InkJet Printer
The read out indicates a paper jam... i have inspected it very closely and cant find any jam at all.. !please help!!
Have you looked inside the roller assembly. More often then not a small piece of paper will get stuck deep inside the roller assembly. This will lead to paper jam errors. Inspect more closely. You will probably find some tiny tidbit somewhere.
Posted on Dec 20, 2007
Tips for a great answer:
Apr 11, 2011 | HP LaserJet 3800 Printer
Jul 29, 2008 | Konica Minolta PagePro 1350W Laser Printer
Mar 05, 2011 | Kyocera Fs-1300d Printer
Jan 04, 2011 | HP LaserJet 4 plus Printer
Nov 29, 2010 | Samsung SCX 4521F All-In-One Laser Printer
Nov 26, 2010 | HP LaserJet P3005n Printer
13.20 PAPER JAM CHECK REAR DOOR
Media stopped in the paper path during power on
or when the top door was closed.
Open top cover and remove toner cartridge. Remove all media in the
paper path, and then re-install toner then open and close the top cover.
Open read door and pinch blue latches on fuser and pull it out.
Inspect the sensor flag for correct movement and any paper obstructions in the
fuser rollers. Re-install fuser and Confirm rear door closure.
Remove tray 2 and confirm paper is not jammed in the pickup area.
Confirm paper size adjusters in the tray are correctly set for paper being
used. (Do not set back paper stop to ANY)
Replace any defective sensors or flags
Hope this helps. Please keep us updated and
remember to rate this answer.
May 24, 2010 | HP LaserJet P4015N Printer
Dec 08, 2009 | Xerox Phaser 6180N Laser Printer
Aug 24, 2009 | HP LaserJet P2015 Printer
144 people viewed this question
Usually answered in minutes!