At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
This error is for the optical image stabilisation.
Generally the camera should be ok after your turn it on and off again.
The error you are getting is because either the OIS has malfunctioned
or is stuck.
I suggest that you take out its memory stick, the
battery etc and keep the camera like that for about 15 minutes. Then
only reinsert the battery (fully Charged) and try to power on.
Try a little tap ( but not too hard) on the side of the camera....this
might realign if the OIS has got misaligned. If you are lucky, you would get if fixed.
If the problem still persists, you need to contact Panasonic.
First press power on /off button for 10 seconds. Then pull battery and memory card from camera. Then again refix battery and start camera without memory card then check. Also try to reset all settings to defaults. Let me know if you need more assistance. Thanks.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Were these cards from another camera and now you want to start using them in the Lumix? If so, you must format the card in the Lumix to get it to work. This will erase the card so download any pics first.
HI there the camera lens guide pin is damages and thats why not zoom the image properly . You got the system error message. So you need to replaced or repair the lens guide pin. Thanks.
This error is for the optical image stabilisation.
Generally the camera should be ok after your turn it on and off again. The error you are getting is because either the OIS has malfunctioned or is stuck.
I think you might need to take it to Panasonic since the camera is still new and you are sure that you did not bang it or dropped it.
But Before that, I suggest that you take out its memory stick, the battery etc and keep the camera like that for about 15 minutes. Then only reinsert the battery (fully Charged) and try to power on.
Try a little tap ( but not too hard) on the side of the camera....this might realign if the OIS has got misaligned. If you are lucky, you might not need to go to Panasonic.
Hello friends, My Panasonic Lumix dig. camera Screen is showing the message that pl. switch off the cametra and on again. when i did the same again I face the same problem. Pl. help me to solve the problem
The only thing not functioning was the lens I could turn on off see menus etc but could not take a picture and the lens would not retract - My husband cleaned the battery terminals on battery & in camera -IT WORKED !!!! good as new -
Tried this, does not correct problem
×