Photos not transferring from camera to the computer

Hi,

Here is a tip that I wrote about how to find the manuals, drivers, downloads andsupport for Digital Cameras.

DigitalCamera Manuals, Drivers, Downloads, and SupportHow to easilydownload Pictures from Digital Camera
heatman101

In order to transfer the pictures to the computer you have to turn the switch on to get the computer to detect it, Do you have your manual? if not reply back and I can send you directions. The other thing is you may have not taken any pictures if you did not have it set up right.

Hi friend,

Yes you can....you tranfer photos between computer and camera. but you need to be use cable for it..otherwise you can't transfer data without cable

Time for a new camera, the cost to have it exchanged by Nikon is near the cost to replace.

Make sure photo files name must be under DSC00001 to DSC99999
connect your camera to computer, click My Computer, Removable Disk, Folder and copy photo files from computer and paste in that folder. If file name is different, camera will not show it in playback though file is in memory stick.

The camera will not display photos that have been edited by something else. Rotating counts as editing. Just opening a photo and then saving it without doing anything else counts as editing.

change the pic format options in the camera to read *.jpeg intead of *.raw

if they are in jpeg maybe the computer dosn't understand the way the camera formated the sd card mine dose the same thing when i try to tranfer images from my aiptek dzo-v50 without the camra i just get card read error

I have a Fuji FinePix S5000 Digital camera with a broken LCD screen. I can take pictures thru the view finder but can't see on the LCD screen. How can I get it fixed and how costly would it be?

Check the Camera Manual
The usual way is to put card in and using the menual tranfer from internal to card.
The computer should also pick up the camera as an external drive.

Try NOT connecting your camera to your computer.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.