Canon mp 530 error u043 cant get rid of it - Canon PIXMA MP530 All-In-One InkJet Printer

Canon Printer Error Code u043 typically occur when the contact of the print head is damaged and it lost proper connection with the printer. By properly reseating the print head inside the printer, one can fix Canon Printer Error Code u043 in minimal time consumption.

Issue: ERROR LCD: The following ink tank cannot be recognized. U043

1. Replace ink tank(s) MP800R / MP830 / MP530 2. Snap in ink tanks properly MP800R / MP830 / MP530

6A00 is a problem with the sheet feed unit.
Follow Canon's suggestion, take it or send the unit UPS to the Authorized Repair Facility.
You will NOT be able to resolve the problem yourself.

The U043 error code indicates that an ink tank is not installed. One or more ink tank icons on the LCD should also be lit up. The lit up icon indicates the applicable ink tank. Verify these tanks are indeed fully seated in the print head and that they are lit up red.

You can also press the OK button to clear this message and continue.

Already posted on Fixya.

http://www.fixya.com/support/t319660-mp500_ink_tank_cannot_recognized_error

Its for mp 500, but would work for mp 600.
Thanks.

You will need to call our technical support line on 0845 20 20 118

Hi
This is same as the wat full
The 6A00 is a Canon generic code for paper path jam.

Solution 1:
Move the printhead carriage back and forth a few times.

Solution 2:
Check the purge unit: Moving the print head assembly will not clear a purge unit if its jammed with paper, paper clips, push pins, screws, cookie crisp, flower bud pods or the like.

Solution 3:
Press the ink pads down in the purge unit.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Fiend your solution direct from Canon. Here is your solution...



http://www.canon.com/printer/prob676ijt65/solution
11111111

most likely a faulty Cartridge, try a new one,
otherwise it will be a faulty internal component(cartridge contact, mainboard or carriage assembly) will need service